We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green circuit board with gold contacts and black memory chips

OWC

OWC 4GB DDR3 1600 CL11 1Rx8 240-pin 1.5V Non-ECC UDIMM HP EliteDesk 705 G2 800 G1

SKU CH-YGEF-0RTRS

A 4 GB DDR3-1600 UDIMM upgrade for HP EliteDesk 705 G2 and 800 G1 desktops

  • Total capacity4 GB
  • Rated speedDDR3 1600 (PC3 12800)
  • CAS latencyCL11
  • Rated voltage1.5 V
  • Buffer typeUnbuffered
  • Memory rank1Rx8
  • 4GB capacity adds headroom for multitasking
  • DDR3 1600 speed keeps data moving smoothly
  • CL11 latency supports responsive system operation
  • 5V standard voltage ensures broad desktop compatibility
  • Validated for HP EliteDesk 705 G2 and 800 G1 models

4GB DDR3 1600 UDIMM for HP EliteDesk

This 4GB DDR3 1600 CL11 module upgrades HP EliteDesk 705 G2 Tower and 800 G1 SFF or Tower systems. It uses a 240-pin unbuffered non-ECC design that matches the factory specifications for these desktops. The single 1Rx8 rank installs in any available DIMM slot without configuration changes.

JEDEC standard 1.5V operation

The module runs at the standard 1.5V DDR3 voltage defined by JEDEC, so the system memory controller draws no extra power. Passive operation with no heat spreader keeps acoustics identical to the original equipment. Power consumption stays within the platform's normal memory budget during typical workloads.

Replaces slower or smaller DDR3 DIMMs

Swapping out lower-capacity or slower DDR3 sticks adds headroom for multitasking and larger files. The upgrade is worthwhile when the current configuration leaves free slots or uses modules below 1600 speed. Systems already filled with matching 1600 CL11 modules will not see further benefit from this part.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $17.99
Cheaper than about 92% of the 21,161 comparable items (median $397.99).
Total capacity 4 GB
Lower than about 90% of the 20,941 comparable items (median 32 GB).
Price per GB $4.50 per GB
Cheaper than about 81% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameOWC
Part number1U6D31R804 GB
Total capacity4 GB
Product type240-Pin DDR3 Non-ECC UDIMM
Performance
Rated speedDDR3 1600 (PC3 12800)
Memory
CAS latencyCL11
ECC supportNo
Buffer typeUnbuffered
Memory rank1Rx8
Heat spreaderNo
Power
Rated voltage1.5 V
Compatibility
Compatible systemsHP EliteDesk 705 G2 Tower
HP EliteDesk 800 G1 SFF
HP EliteDesk 800 G1 Tower

Other versions of this model

5 more in the same range

Questions about this item

How do I install the 240-pin DDR3 DIMM in my HP EliteDesk 800 G1 SFF, and which step is often missed?

Power off and unplug the PC, open the case, align the notch on the 240-pin module with the slot key, press firmly until both retention clips snap shut, then verify the module sits evenly before closing the case.

What maintenance or replacement will this 4GB DDR3 1600 CL11 module need over its lifetime?

No routine maintenance is required; if errors appear in memory diagnostics or the system becomes unstable, replace the module — it carries a limited lifetime warranty from OWC.

What limit appears first when this 1.5V DDR3 1600 module runs under sustained heavy load?

The CL11 latency at 1600 MHz sets the throughput ceiling; thermal throttling is unlikely on an unbuffered UDIMM without a heat spreader in a ventilated EliteDesk chassis.

More in Model-Specific Memory Upgrades

Similar items