OWC 512GB (4×128GB) DDR5 4800 CL40 ECC Registered RDIMM memory upgrade
- 512 GB (4 × 128 GB)
- DDR5 4800
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
512 GB DDR5 ECC registered kit of four 128 GB modules at 4800 MT/s CL40 for Dell PowerEdge HS5610 and HS5620 servers
This 512 GB kit contains four 128 GB DDR5 4800 ECC registered RDIMMs built for Dell PowerEdge HS5610 and HS5620 servers. It runs at 1.1 V with CL40 latency and a 4Rx4 organisation. The modules are JEDEC compliant and carry no heat spreader. They are intended for workstation, server and NAS platforms that require registered ECC memory.
Installation follows standard 288-pin DIMM procedure: power down, open the chassis, align the notch and press until the latches click. The kit will not work in standard desktop boards that accept only unbuffered memory. Mixing these registered modules with unbuffered or load-reduced ECC DIMMs is unsupported and will prevent boot. No extra tools or firmware steps are required beyond the server’s normal memory configuration utility.
This kit suits administrators expanding memory in the listed PowerEdge models or building new configurations that specify DDR5 4800 registered ECC. It is not for desktop PCs, laptops or any system that requires unbuffered or load-reduced memory. Buyers needing different capacities, speeds or form factors should look at other system-specific kits.
Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | OWC |
| Part number | 4R8D54R4512S |
| Total capacity | 512 GB (4 × 128 GB) |
| Product type | 288-Pin DDR5 ECC RDIMM |
| Performance | |
| Rated speed | DDR5 4800 (PC5 38400) |
| Memory | |
| CAS latency | CL40 |
| ECC support | Yes |
| Buffer type | Registered |
| Memory rank | 4Rx4 |
| Heat spreader | No |
| Power | |
| Rated voltage | 1.1 V |
| Compatibility | |
| Compatible systems | Dell PowerEdge HS5610 Dell PowerEdge HS5620 |
Other versions of this model
Check the BIOS or iDRAC to verify all 512GB are detected at 4800MHz with CL40 timings and ECC registered status.
The kit contains four 128GB DDR5 4800 CL40 4Rx4 288-pin 1.1V ECC RDIMM modules. No additional parts are required.
This 512GB kit (4 x 128GB) is the specific configuration validated for those servers.
More in Model-Specific Memory Upgrades
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?