OWC 64GB DDR4 2933 CL21 2Rx4 288-pin 1.2V ECC Registered RDIMM memory upgrade
- 64 GB
- DDR4 2933
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
64 GB DDR4 ECC registered DIMM running at 2933 MHz CL21 for HP SimpliVity 325 Gen10 servers
This OWC module is a single 64GB DDR4 2933 ECC Registered RDIMM built for the HP SimpliVity 325 Gen10. It uses a 288-pin form factor and 2Rx4 organisation to deliver 64GB of capacity in one slot. The part is not compatible with standard desktop computers or with unbuffered and load-reduced memory types.
The module runs at 1.2V and carries the PC4-23400 speed rating with CL21 latency. Registered buffering adds a clock cycle for signal integrity in multi-DIMM server configurations. No heat spreader is fitted, so airflow across the DIMM sockets handles thermal dissipation.
This memory only works in systems that require ECC Registered DDR4 RDIMMs; it will not function in desktop boards, laptops or NAS units that expect unbuffered or load-reduced modules. Buyers who need non-ECC or consumer memory should select a different product.
Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | OWC |
| Part number | 2R9D42R464 GB |
| Total capacity | 64 GB |
| Product type | 288-Pin DDR4 ECC RDIMM |
| Performance | |
| Rated speed | DDR4 2933 (PC4 23400) |
| Memory | |
| CAS latency | CL21 |
| ECC support | Yes |
| Buffer type | Registered |
| Memory rank | 2Rx4 |
| Heat spreader | No |
| Power | |
| Rated voltage | 1.2 V |
| Compatibility | |
| Compatible systems | HP SimpliVity 325 Gen10 |
Other versions of this model
Power down the server, open the chassis, align the module notch with the slot key, press firmly until both clips lock, then verify in BIOS that the 64GB module registers at 2933MHz; the step often missed is confirming the speed and ECC status in firmware before closing the case.
No scheduled maintenance is required; the module has no heat spreader and relies on chassis airflow, so keep server fans and filters clean, and replace the DIMM only if memory diagnostics report correctable or uncorrectable ECC errors.
The memory controller caps operation at 2933MHz CL21; sustained heavy loads will hit the bandwidth ceiling of the PC4-23400 rating before thermal throttling becomes a factor on this registered DIMM.
More in Model-Specific Memory Upgrades
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?