OWC 64GB DDR4 3200 CL22 ECC RDIMM Supermicro H11DSi memory upgrade
- 64 GB
- DDR4 3200
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
64 GB DDR4 2933 MHz ECC registered RDIMM for Supermicro X11 server and workstation boards
Capacity 64GB
This 64GB DDR4 2933MHz module is a 288-pin ECC Registered DIMM built for Supermicro X11 server and workstation boards. It operates at 1.2V with CL21 latency and a 2Rx4 rank configuration without a heat spreader. The module is validated for the X11DSN-TS, X11OPi-CPU, X11QPH+, X11QPL and X11SPA-T motherboards.
This memory fits servers, workstations and NAS systems that require registered ECC DDR4. It will not work in standard desktop computers that use unbuffered non-ECC modules. It cannot be mixed with unbuffered memory. Buyers needing consumer desktop RAM or unbuffered ECC should look at a different product type.
Confirm your board is one of the five listed Supermicro X11 models before ordering. Check the manual for maximum supported capacity per slot and the required population order for registered DIMMs. The module is backward compatible with 2133MHz, 2400MHz and 2666MHz bus speeds. Ensure the system BIOS is current for full compatibility.
Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | OWC |
| Part number | 2R9D42R464 GB |
| Total capacity | 64 GB |
| Product type | 288-Pin DDR4 ECC RDIMM |
| Performance | |
| Rated speed | DDR4 2933 (PC4 23400) |
| Memory | |
| CAS latency | CL21 |
| ECC support | Yes |
| Buffer type | Registered |
| Memory rank | 2Rx4 |
| Heat spreader | No |
| Power | |
| Rated voltage | 1.2 V |
| Compatibility | |
| Compatible systems | Supermicro Motherboard X11DSN-TS Supermicro Motherboard X11OPi-CPU Supermicro Motherboard X11QPH+ Supermicro Motherboard X11QPL Supermicro Motherboard X11SPA-T |
Other versions of this model
Yes, the X11DSN-TS must accept DDR4 288-pin ECC Registered RDIMMs at 1.2V; this module is validated for that board and the listed X11 series models.
The module is backward compatible with 2133MHz, 2400MHz and 2666MHz ECC Registered DIMMs; the system will run all populated slots at the lowest common speed.
Check the BIOS memory information or run dmidecode — it should show 64GB, 2933MHz, CL21, 1.2V, ECC Registered, 2Rx4 organisation for the installed slot.
More in Model-Specific Memory Upgrades
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?