OWC 64GB DDR4 3200 ECC Registered RDIMM CL22 2Rx4 1.2V 288-pin 3R2D42R464GB
- 64 GB
- DDR4 3200
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
64 GB DDR4 3200 ECC registered RDIMM for Gigabyte E252 and G242 servers
Capacity 64GB
This OWC module provides 64GB of DDR4 3200 memory in a single 288-pin registered DIMM. It is built for Gigabyte E252-P30, E252-P31, G242-P31, G242-P32 and G242-P33 servers and workstations that require ECC registered RAM. Standard desktop computers cannot use this module.
The module runs at 1.2V with a CAS latency of 22 and conforms to the PC4-25600 JEDEC standard. No heat spreader is fitted, so airflow in the server chassis handles cooling. Registered buffering adds a clock cycle but reduces electrical load on the memory controller.
The 2Rx4 registered design means this DIMM must not be combined with unbuffered or ECC load-reduced memory in the same system. It is backward compatible with 2133, 2400, 2666 and 2933MHz bus speeds, allowing use in older Gigabyte platforms that support those rates.
Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | OWC |
| Part number | 3R2D42R464 GB |
| Total capacity | 64 GB |
| Product type | 288-Pin DDR4 ECC RDIMM |
| Performance | |
| Rated speed | DDR4 3200 (PC4 25600) |
| Memory | |
| CAS latency | 22 |
| ECC support | Yes |
| Buffer type | Registered |
| Memory rank | 2Rx4 |
| Heat spreader | No |
| Power | |
| Rated voltage | 1.2 V |
| Compatibility | |
| Compatible systems | Gigabyte E252-P30 Gigabyte E252-P31 Gigabyte G242-P31 Gigabyte G242-P32 Gigabyte G242-P33 |
Other versions of this model
Power down, open the chassis, align the notch on the 288-pin module with the slot key, press firmly until both latches click, then verify in BIOS that ECC registered mode is active — skipping the BIOS check is the common miss.
No scheduled maintenance is required; the module has no heat spreader and runs at 1.2V, so only replace it if a memory test reports correctable ECC errors rising or a DIMM fails POST.
The registered buffer adds one clock cycle of latency, so sustained throughput tops out at the JEDEC 3200 MT/s rating; thermal throttling is unlikely at 1.2V without a spreader.
More in Model-Specific Memory Upgrades
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?