OWC 8GB DDR3 1333 ECC Registered RDIMM 2Rx4 240-pin 1.5V memory upgrade
- 8 GB
- DDR3 1333
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
An 8 GB DDR3 1333 ECC registered RDIMM for Supermicro SuperServer 6016 and 6026 series
This 8 GB DDR3 1333 PC3-10600 CL9 1.5 V registered ECC module uses a 240-pin form factor and a 2Rx4 organisation. It is built for Supermicro SuperServer 6016 and 6026 series chassis and replaces several Supermicro part numbers. The single DIMM adds error-correcting registered memory to compatible workstations and servers.
It fits Supermicro SuperServer 6016T, 6016TT, 6016XT, 6026T and 6026TT models that require registered ECC DDR3 RDIMMs. It will not operate in platforms that accept only unbuffered non-ECC DIMMs or that use a different DDR generation. Buyers needing unbuffered memory or a different pin count should select another module.
The decisive specification is that the system must support 240-pin DDR3 registered ECC RDIMMs at 1333 MT/s with 1.5 V operation. If the motherboard or BIOS requires unbuffered DIMMs or a different voltage the module will not function.
Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | OWC |
| Part number | 1R3D32R408 GB |
| Total capacity | 8 GB |
| Product type | 240-Pin DDR3 ECC RDIMM |
| Performance | |
| Rated speed | DDR3 1333 (PC3 10600) |
| Memory | |
| CAS latency | CL9 |
| ECC support | Yes |
| Buffer type | Registered |
| Memory rank | 2Rx4 |
| Heat spreader | No |
| Power | |
| Rated voltage | 1.5 V |
| Compatibility | |
| Compatible systems | Supermicro SuperServer 6016T Series Supermicro SuperServer 6016TT Series Supermicro SuperServer 6016XT Series Supermicro SuperServer 6026T Series Supermicro SuperServer 6026TT Series |
Other versions of this model
Yes, it is built for the 6026TT series and carries the same 2Rx4 organisation, 1.5 V voltage and CL9 timing, so it will run in step with identical modules already installed.
Enter the server BIOS or run a hardware-inventory tool such as dmidecode; both will report the DIMM as 8 GB, DDR3-1333, registered ECC, 2Rx4 at 1.5 V.
The box holds one 8 GB 240-pin DDR3 1333 CL9 2Rx4 1.5 V ECC registered RDIMM and nothing else; no brackets, cables or extra modules are supplied.
More in Model-Specific Memory Upgrades
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?