We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green circuit board with black memory chips and gold edge contacts

OWC

OWC 8GB DDR3 1600 CL11 2Rx8 204-pin 1.5V Non-ECC SODIMM for HP ProDesk 400 G1 Mini 600 G1 Mini

SKU CH-876B-PS8FD

An 8 GB DDR3 1600 CL11 SODIMM upgrade for HP ProDesk 400 G1 Mini and 600 G1 Mini systems

  • Total capacity8 GB
  • Rated speedDDR3 1600 (PC3 12800)
  • CAS latencyCL11
  • Rated voltage1.5 V
  • Buffer typeUnbuffered
  • Memory rank2Rx8
  • Boost responsiveness with 8 GB DDR3 1600 memory
  • JEDEC-standard 1.5 V module ensures warranty-safe upgrade
  • CL11 latency and 2Rx8 rank optimise data throughput
  • 204-pin SODIMM fits HP ProDesk 400 G1 Mini and 600 G1 Mini
  • Single-module design simplifies DIY installation

OWC 8GB DDR3 SODIMM for HP ProDesk Mini

This 8GB DDR3 1600 module is built specifically for HP ProDesk 400 G1 Mini and 600 G1 Mini systems. It fits the 204-pin SODIMM slot and runs at 1.5V without ECC or buffering. The single stick upgrades one slot in these compact desktops.

8GB capacity handles everyday multitasking

Eight gigabytes lets you keep several browser tabs, office apps and background services open at once. The CL11 latency and PC3-12800 bandwidth suit the memory controller in these Minis. Heavy video editing or large virtual machines will exceed the headroom of a single 8GB stick.

2Rx8 dual-rank organisation

The module uses a 2Rx8 configuration that matches the density the ProDesk Mini chipset expects. Systems that require single-rank 1Rx8 SODIMMs will not recognise this stick correctly. Verify the rank requirement in your service manual before ordering.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $27.99
Cheaper than about 86% of the 21,161 comparable items (median $397.99).
Total capacity 8 GB
Lower than about 80% of the 20,941 comparable items (median 32 GB).
Price per GB $3.50 per GB
Cheaper than about 87% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameOWC
Part number1S6D32R808 GB
Total capacity8 GB
Product type204-Pin DDR3 Non-ECC SODIMM
Performance
Rated speedDDR3 1600 (PC3 12800)
Memory
CAS latencyCL11
ECC supportNo
Buffer typeUnbuffered
Memory rank2Rx8
Heat spreaderNo
Power
Rated voltage1.5 V
Compatibility
Compatible systemsHP ProDesk 400 G1 Mini
HP ProDesk 600 G1 Mini

Other versions of this model

5 more in the same range

Questions about this item

Will the 1.5V DDR3 1600 SODIMM run reliably in my ProDesk 400 G1 Mini alongside the original memory?

The module matches the HP ProDesk 400 G1 Mini and 600 G1 Mini specification of 1.5V DDR3 1600 CL11 2Rx8 204-pin Non-ECC SODIMM, so it operates at the same voltage and timing as the factory-installed memory.

How can I verify the 8GB module is recognised at the correct 1600 speed after installation?

Boot the ProDesk, open Task Manager or BIOS, and confirm the slot shows 8GB running at 1600 MT/s with CL11 latency.

Does the single 8GB 204-pin SODIMM ship with any brackets or thermal pads, or must I supply them?

The upgrade consists of the bare 204-pin SODIMM only; no heat spreader, brackets or thermal pads are included.

More in Model-Specific Memory Upgrades

Similar items