We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green rectangular circuit board with gold edge contacts and black memory chips

OWC

OWC 8GB DDR3 1600 CL11 2Rx8 204-pin 1.5V SODIMM memory upgrade

SKU CH-8WG9-72FYS

8GB DDR3 1600 CL11 SODIMM module for ASUSTOR AS7004T, AS7008T and AS7012T NAS systems

  • Total capacity8 GB
  • Rated speedDDR3 1600 (PC3 12800)
  • CAS latencyCL11
  • Rated voltage1.5 V
  • Buffer typeUnbuffered
  • Memory rank2Rx8
  • 8GB capacity adds headroom for multitasking on compatible ASUSTOR NAS
  • DDR3 1600 PC3-12800 CL11 matches system-rated speed exactly
  • 5V JEDEC standard voltage ensures warranty-safe operation
  • 204-pin SODIMM form factor fits AS7004T AS7008T AS7012T slots directly
  • Single 2Rx8 module simplifies installation without pairing requirements

Compatible ASUSTOR NAS models

This 8 GB DDR3 1600 SODIMM is built for ASUSTOR AS7004T, AS7008T and AS7012T network-attached storage units. It arrives as a single 204-pin non-ECC module rated at 1.5 V with CL11 latency. The part replaces ASUSTOR part number AS7-RAM8G and meets JEDEC and RoHS standards.

Upgrading from lower-capacity modules

The module suits owners of the listed ASUSTOR NAS models who currently run smaller DDR3 SODIMMs and need more memory for multitasking or larger workloads. A jump to 8 GB is worthwhile when the system shows memory pressure during file transfers, virtualization or heavy application use. Systems already at the maximum supported capacity will not benefit.

Verify slot count and maximum memory

Before ordering, confirm how many SODIMM slots your NAS model provides and the total memory limit stated by ASUSTOR. The module is unbuffered, non-ECC, 2Rx8 and uses 1.5 V DDR3 at 1600 MHz; mixing different speeds, voltages or ranks can cause instability. Ensure the chassis allows physical access to the memory slots for installation.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $27.99
Cheaper than about 86% of the 21,161 comparable items (median $397.99).
Total capacity 8 GB
Lower than about 80% of the 20,941 comparable items (median 32 GB).
Price per GB $3.50 per GB
Cheaper than about 87% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameOWC
Part number1S6D32R808 GB
Total capacity8 GB
Product type204-Pin DDR3 Non-ECC SODIMM
Performance
Rated speedDDR3 1600 (PC3 12800)
Memory
CAS latencyCL11
ECC supportNo
Buffer typeUnbuffered
Memory rank2Rx8
Heat spreaderNo
Power
Rated voltage1.5 V
Compatibility
Compatible systemsASUSTOR AS7004T
ASUSTOR AS7008T
ASUSTOR AS7012T

Other versions of this model

5 more in the same range

Questions about this item

Does the 204-pin DDR3 SODIMM fit the ASUSTOR AS7004T, AS7008T and AS7012T memory slots?

Yes, the 204-pin DDR3 SODIMM is built for the ASUSTOR AS7004T, AS7008T and AS7012T and replaces the AS7-RAM8G module.

What is the correct way to seat the module so the 204 pins make full contact?

Align the notch on the module with the key in the slot, insert at a slight angle, then press down firmly until the side clips click into place.

Will the 1.5V DDR3 1600 CL11 module need any firmware update or replacement after installation?

No firmware update is required; the JEDEC-standard 1.5V DDR3 1600 CL11 module runs at its rated speed and is covered by a limited lifetime warranty.

More in Model-Specific Memory Upgrades

Similar items