We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green rectangular circuit board with gold edge connector and black memory chips

OWC

OWC 8GB DDR4 2133MHz CL15 1.2V 260-pin SODIMM for Dell Inspiron 11 3195 memory upgrade

SKU CH-HC29-BA728

8GB DDR4 SODIMM running at 2133MHz CL15 upgrades the Dell Inspiron 11 3195 with low-voltage 1.2V memory

  • Total capacity8 GB
  • Rated speedDDR4 2133 (PC4 17000)
  • CAS latencyCL15
  • Rated voltage1.2 V
  • Buffer typeUnbuffered
  • Memory rank2Rx8
  • 8GB capacity adds multitasking headroom for everyday workloads
  • DDR4 2133MHz CL15 speed matches Dell Inspiron 11 3195 specifications
  • 2V low-voltage operation reduces power draw and heat
  • 260-pin SODIMM form factor fits the laptop memory slot directly
  • JEDEC-compliant non-ECC unbuffered design ensures stable compatibility

OWC 8GB DDR4 2133MHz SODIMM for Dell Inspiron 11

This OWC 8GB DDR4 2133MHz CL15 module is built for the Dell Inspiron 11 3195. It uses a 260-pin SODIMM form factor and runs at 1.2V without ECC or a heat spreader. The upgrade suits owners of that specific laptop who need more memory for everyday multitasking. It is not for builders who need a second card or a different pin count.

Thermals noise and power draw at 1.2V

Operating at 1.2V, the unbuffered DDR4 module draws minimal power and produces little heat during normal use. No heat spreader is fitted, so the stick relies on the laptop's internal airflow. Silent operation is typical because there are no moving parts on the module itself.

Sustained load behaviour without ECC

Under sustained workloads the CL15 latency and 2133MHz speed remain stable within JEDEC limits. The 2Rx8 rank organisation handles continuous data flow for typical office and browser tasks. Systems requiring ECC error correction or higher frequencies should look elsewhere.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $43.99
Cheaper than about 79% of the 21,161 comparable items (median $397.99).
Total capacity 8 GB
Lower than about 80% of the 20,941 comparable items (median 32 GB).
Price per GB $5.50 per GB
Cheaper than about 70% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameOWC
Part number2S1D42R808 GB
Total capacity8 GB
Product type260-Pin DDR4 Non-ECC SODIMM
Performance
Rated speedDDR4 2133 (PC4 17000)
Memory
CAS latencyCL15
ECC supportNo
Buffer typeUnbuffered
Memory rank2Rx8
Heat spreaderNo
Power
Rated voltage1.2 V
Compatibility
Compatible systemsDell Inspiron 11 3195

Other versions of this model

5 more in the same range

Questions about this item

How do I install the 260-pin SODIMM into the Dell Inspiron 11 3195, and what step is often missed?

Power off the laptop, unplug the adapter and remove the battery if accessible. Open the memory door, align the notch on the 260-pin module with the slot key, insert at an angle and press down firmly until both side clips click. The step most people miss is pressing hard enough to engage both clips fully.

What maintenance or replacement will this 8GB DDR4 2133MHz CL15 module need later?

No scheduled maintenance is required. The module has no heat spreader and runs at 1.2V, so dust buildup in the laptop vents is the only factor that can shorten its life. If a memory error appears, run a diagnostic to confirm the module before considering a swap.

What limit appears first when the 2Rx8 8GB SODIMM runs sustained workloads?

The CL15 latency at 2133MHz sets the throughput ceiling. Under sustained load the memory controller will hit that timing boundary before thermal throttling becomes an issue, because the unbuffered DDR4 module operates at the standard 1.2V without a heat spreader.

More in Model-Specific Memory Upgrades

Similar items