Canon 5322B001 projector lamp 245 Watt for LV-7490 LV-8320
- 245 W
- 3,000 (Normal) - 5,…
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
A Panasonic-branded OEM replacement lamp with a Philips UHM 200 W bulb in a ready-to-install housing, rated for 2 000 hours
This replacement lamp module fits Panasonic projectors using the PT-F300NTU designation. It ships as a complete assembly with a 200W UHM bulb already mounted in its housing. The unit is intended for technicians or venue operators who need a direct swap without handling a bare bulb. Buyers who need a different wattage or a bare bulb only should look elsewhere.
The lamp is rated for 2000 hours of typical operation before brightness drops to half its initial output. Running the projector in eco mode can extend usable life, while constant high-brightness use will shorten it. The 200W power draw also defines the minimum cooling capacity the projector must provide. Users who need longer rated life or lower power consumption cannot meet those needs with this module.
The pre-assembled housing slides into the projector's lamp bay and locks without tools. Installation usually takes under a minute once the access cover is removed. The most frequent issue is forgetting to reset the projector's lamp-hour counter after fitting the new module, which leaves the replacement warning active. Another common error is touching the bulb glass with bare fingers, leaving residue that can cause hot spots and premature failure.
Measured against everything we stock in Replacement Projector Bulbs, at today’s prices. Recalculated every night.
| Product | |
|---|---|
| Product type | Projector Lamp |
| Display | |
| Lamp lifespan | 2,000 Hrs. |
| Power | |
| Power rating | 200 W |
Three OEM versions use genuine Philips, Osram, Ushio, Phoenix, Iwasaki or Matsushita bulbs; the compatible version uses OEM parts from a leading third-party maker. All meet ISO 9001 checks for beam performance, ignition, voltage, appearance, connections and run-time.
The 200 W Philips UHM bulb draws 200 watts in operation, delivering the brightness and colour performance the projector was designed for at that power level.
The 2,000-hour rating follows the manufacturer’s standard measurement method for UHM lamps under typical operating conditions; actual hours vary with usage patterns, eco-mode settings and ambient temperature.
More in Replacement Projector Bulbs
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?