Panasonic PT-PX960 OEM Replacement Projector Lamp 200W
A new 200 W projector lamp module with a 2,000-hour rated life for Panasonic PT-PX960 models
- Power rating200 W
- Lamp lifespan2,000 Hrs.
- Product typeProjector Lamp
- Ready-to-install module saves setup time
- 200 W UHM bulb matches original brightness
- 2,000-hour rated life reduces replacements
- Manufactured to ISO 9001 quality standards
- Compatible with Panasonic PT-PX960 projectors
Panasonic PT-PX960 Replacement Lamp
This 200W OEM replacement lamp module includes a new Philips UHM bulb inside a complete housing. It is built for Panasonic projectors that use the ET-LAF100 part number and arrives fully assembled for immediate use. The unit is rated for 2,000 hours of lamp life.
Upgrading from a dim or expired lamp
Replace the module when the projector image becomes noticeably darker or when the lamp-hour counter reaches the rated limit. The jump is worth it if the projector is otherwise functioning correctly and a new lamp restores full brightness. Buyers who need a higher-wattage module or a different connector type cannot use this part.
Tool-free housing swap
Installation consists of opening the projector lamp door, removing the old housing and sliding the new module into place until it seats firmly. No separate bulb handling is required because the bulb comes pre-mounted. The most common issue is forgetting to reset the lamp-hour counter in the projector menu after fitting the new unit.
How it compares
Measured against everything we stock in Replacement Projector Bulbs, at today’s prices. Recalculated every night.
- Price $126.99
- Pricier than about 72% of the 9,513 comparable items (median $99.99).
- Power rating 200 W
- Lower than about 60% of the 8,831 comparable items (median 215 W).
Specifications
| Product | |
|---|---|
| Product type | Projector Lamp |
| Display | |
| Lamp lifespan | 2,000 Hrs. |
| Power | |
| Power rating | 200 W |
Questions about this item
Does the PT-PX960 lamp module include the housing so it fits directly into the projector?
Yes, the ET-LAF100 module is a fully assembled bulb and housing ready for direct installation in the Panasonic projector.
What is the correct procedure to install the ET-LAF100 lamp and which step is most often missed?
Power off the projector, let it cool, remove the lamp cover, loosen the securing screws, slide out the old module, insert the new ET-LAF100 until it seats firmly, tighten the screws, replace the cover, then reset the lamp timer in the menu — the timer reset is the step most often missed.
When will the 200W UHM bulb need replacement based on the rated 2,000-hour life?
The lamp is rated for 2,000 hours of use; plan replacement when the projector's lamp-hour counter approaches that figure or when brightness noticeably drops.
More in Replacement Projector Bulbs
Similar items
Vivitek D966HD 310W Projector Lamp 5811118436-SVV
- 310 W
- 2,500 Hrs. (Normal)…





