We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Three black 120mm ARGB case fans with thick 28mm frames and dual-halo lighting

PCCOOLER

PCCOOLER F7 X120 ARGB 120mm case fan 3-pack Black

SKU CH-XVA0-SSWQR

A 120 mm three-pack with 28 mm thick frames, dual ball bearings and wireless ARGB, delivering up to 83 CFM and 5.7 mmH₂O at 3000 RPM

  • Fan size120 mm
  • LED lightingARGB
  • Bearing designDual Ball Bearing
  • Rotational speedL:500 to 1,500 RPM±10% M:500 to 2,200 RPM±10% H:500 to 3,000
  • Airflow rateL:55CFM M:65CFM H:83CFM
  • Operating noiseL:15 to 22.3 dBA M:15 to 28.9 dBA H:15 to 33.1 dBA

Color Black

  • Three fans in one pack for balanced case cooling
  • 28 mm thick frame pushes up to 83 CFM at high speed
  • Three preset modes from 500 to 3000 RPM for any workload
  • Dual ball bearing plus 3-phase 6-slot motor for smooth long-life operation
  • Wireless contact design with 24 ARGB LEDs syncs via 5 V 3-pin header

Three-pack for balanced airflow

The PCCOOLER F7 X120 ARGB arrives as a 3-pack of 120mm case fans built for builders who want coordinated cooling and lighting without mixing single units. Each fan uses a 4-pin PWM connector so the motherboard can regulate speed automatically across the full 500-3000 RPM range. The set suits mid-tower and full-tower cases that have three 120mm mounting positions available.

28mm thick frame with wireless ARGB

A thickened 28mm frame holds wide-span variable-section blades and a three-phase six-slot motor that reduces vibration at high speed. Glass-fibre reinforced PBT blades resist deformation under sustained load. Dual ball bearings support vertical or horizontal mounting without premature wear. Wireless contact pads replace traditional ARGB cables, cutting clutter while the dual-halo ring with 24 LEDs syncs via a standard 5V 3-pin motherboard header.

Three preset curves up to 33.1 dBA

Quiet mode caps the fans at 1500 RPM for 55 CFM and 1.7 mmH2O at 15-22.3 dBA. Balanced mode raises the limit to 2200 RPM delivering 65 CFM and 3.3 mmH2O at 15-28.9 dBA. Performance mode unlocks the full 3000 RPM for 83 CFM and 5.7 mmH2O at 15-33.1 dBA. The 15 dBA floor means the fans are near-silent at idle regardless of the selected profile.

How it compares

Measured against everything we stock in PC Cooling Fans, at today’s prices. Recalculated every night.

Price $101.99
Pricier than about 90% of the 8,339 comparable items (median $19.99).
Fan size 120 mm
Typical for this category: the median of 1,114 items is 120 mm.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand namePCCOOLER
Product lineF7
Model nameF7 X120 ARGB BK 3IN1
Part numberF7 × 120-BKAC336-GL
Product typeCase Fan
Product colorBlack
Performance
Rotational speedL:500 to 1,500 RPM±10%
M:500 to 2,200 RPM±10%
H:500 to 3,000 RPM±10%
Airflow rateL:55CFM
M:65CFM
H:83CFM
Air pressure ratingL:1.7mmH2O
M:3.3mmH2O
H:5.7mmH2O
Power
Power input connector4-pin PWM
Size & build
Fan size120 mm
Bearing designDual Ball Bearing
Number of fans3 Fans
Fan depth28 mm
Product dimensions120 × 120 × 28 mm
Compatibility
Compatible withCase
Environment & compliance
Operating noiseL:15 to 22.3 dBA
M:15 to 28.9 dBA
H:15 to 33.1 dBA
More details
LED lightingARGB

Other versions of this model

5 more in the same range

Questions about this item

What does the 4-pin PWM connector control on these fans?

The 4-pin PWM connector provides power and speed signalling so the motherboard can regulate each fan between 500 and 3000 RPM across the three preset modes.

Will the 28 mm thick frames fit in a standard 120 mm mounting grid?

Yes, each fan measures 120 x 120 x 28 mm, so they occupy the standard 120 mm square footprint while adding 28 mm of depth inside the case.

How do I sync the ARGB lighting without a separate controller?

Connect the 5 V 3-pin ARGB header from the wireless contact hub to a compatible motherboard header and control the 24 LEDs per fan through the board's RGB software.

More in PC Cooling Fans

Similar items