Peerless Industries, Inc. 3-000-18-86 Open Deck Pulley Block
Open-deck pulley block for fibrous rope up to 5/16 in diameter with 1 3/8 in sheave
- Product typeAngle, Pitch & Slope Locators
- Open-deck design suits fibrous rope up to 5/16 in
- Single steel sheave 1 3/8 in OD handles lifting and pulling
- Sleeve bearing reduces friction for smooth operation
- Bolt-on upright mount with 7/32 in hole secures attachment
- Working load not rated — inspect before each use
Open Deck Pulley Block
The Peerless 3-000-18-86 is a steel open deck pulley block designed for lifting and pulling tasks. It features an upright bolt-on mount with a single sheave groove for fibrous rope. The housing is constructed from steel with a sleeve bearing for operation.
Suits fibrous rope rigging
This block suits riggers who need a mounted pulley for 5/16 in fibrous rope in lifting or pulling setups. It is not for users who require a rated working load limit for certified overhead lifting. Buyers needing wire rope compatibility or a swivel attachment should look elsewhere.
Check rope and mounting specs
Verify your rope is fibrous type and matches the 5/16 in maximum diameter before ordering. Confirm the 7/32 in mounting hole diameter fits your bolt hardware. Ensure the 1 3/8 in sheave outside diameter and 15/32 in sheave depth suit your block clearance.
How it compares
Measured against everything we stock in Utility & Specialty Hand Tools, at today’s prices. Recalculated every night.
- Price $7.99
- Cheaper than about 87% of the 2,474 comparable items (median $23.99).
Specifications
| Product | |
|---|---|
| Brand name | Peerless |
| Product type | Angle, Pitch & Slope Locators |
Questions about this item
What size fibrous rope is this 5/16 in max cable pulley block designed to accept?
The open deck pulley block is compatible with fibrous rope up to 5/16 in diameter.
Will the 7/32 in mounting hole fit the bolts on my existing upright bracket?
The block mounts upright with a 7/32 in mounting hole; verify your bracket uses the same bolt diameter before installation.
How can I confirm the sleeve bearing is rotating freely after I bolt the pulley block in place?
After mounting, pull the rope by hand; the 1 3/8 in outside diameter sheave should turn smoothly on the sleeve bearing without binding.
More in Utility & Specialty Hand Tools
Similar items
Bessey Tools WMS-7 Magnetic Welding Square 41 lb hand tool
- Clamps
ZIRCON INTERNATIONAL INC 61910 hand tool
- Stud Finders
- * Stud finder, * Qu…
Westward 2FDC6 Locking C-Clamp 6 In 2 In Cap hand tool
- Clamps
- Nickel Plated
Pacific Handy Cutter S5R Retractable Safety Knife 6" .12 hand tool
- Knives, Cutters & S…
- Green





