Philips MSR Gold 700/2 FastFit DLP Replacement Lamp for D.T.S. XR 700
700 W DLP replacement lamp rated at 50000 nominal lumens with a 7500 K colour temperature
- Product typeProject Lamp
- Product weight0.1
- Bright projection with 50000 lm nominal output
- Accurate colour reproduction at 7500 K colour temperature
- Efficient operation at 71 lm/W luminous efficacy
- Reliable ignition from 198 V minimum supply voltage
- FastFit design for straightforward lamp replacement
Replacement Lamp for D.T.S. XR 700
The Philips MSR Gold 700/2 FastFit is a new DLP replacement lamp built specifically for the D.T.S. XR 700 projector. It restores original brightness and colour performance for venues that rely on consistent large-screen projection. Installation uses the FastFit system for a direct lamp swap without tools.
Sustained Output and Thermal Limits
The lamp delivers a nominal luminous flux of 50000 lm at 700 W rated power with a luminous efficacy of 71 lm/W. Chromaticity coordinates hold at x 298 and y 322 while the correlated colour temperature sits at 7500 K. Maximum bulb temperature reaches 950 C and pinch temperature 500 C, so the projector cooling must handle continuous high-heat operation.
Critical Compatibility Specification
This part is only compatible with the D.T.S. XR 700 projector; it will not fit other models or brands. Buyers needing a different lamp base, wattage or form factor must source the correct module for their specific hardware.
How it compares
Measured against everything we stock in DLP TV Lamps & Bulbs, at today’s prices. Recalculated every night.
- Price $209.99
- Pricier than about 89% of the 8,306 comparable items (median $97.99).
Specifications
| Product | |
|---|---|
| Brand name | Jaspertronics |
| Model name | D.T.S. XR 700-LAMP |
| Part number | D.T.S. XR 700-LAMP |
| Product type | Project Lamp |
Questions about this item
How much power does the 700 W MSR Gold lamp draw and what heat should I expect at the bulb and pinch after hours of use?
The lamp runs at 700 W with a nominal current of 10.2 A; bulb temperature can reach 950 °C and pinch temperature 500 °C.
What projector model and supply voltage does this FastFit lamp require to operate?
It is made for the D.T.S. XR 700 projector and needs a minimum ignition supply voltage of 198 V.
Will the 7500 K colour temperature and CRI 75 of this lamp match the older lamps I have been using in the same projector?
Yes, the lamp delivers a nominal 7500 K correlated colour temperature with a CRI of 75, matching the original specification.
More in DLP TV Lamps & Bulbs
Similar items
Philips MSR Gold 700/2 FastFit DLP Replacement Lamp for Coemar TECHNOBEAM II EXTREME
- Project Lamp





