We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Square thermal pad 15mm each side with protective film

Phobya

Phobya Thermal Pad Ultra 5W/mk 15x15x3mm 17077

SKU CH-GX84-6GSP5

A flexible 15×15 mm thermal pad rated at 5 W/mK that fills gaps on coolers and components

  • Key featuresThese thermal pads are perfectly suited to equalize height d
  • Bridges gaps on uneven cooler surfaces with flexible 15 mm pad
  • Adapts at low pressure thanks to soft, compliant structure
  • Covers microscopic scratches to visible imperfections for full contact
  • Sticky surface holds position without slipping after foil removal
  • Cut to size for VRAM, VRM or large chipset cooling

Phobya Thermal Pad Ultra 5W/mk

This thermal pad is designed to fill gaps between heat-generating components and coolers. Its flexible, low-hardness structure conforms to uneven surfaces at low contact pressure. The pad measures 15x15x3mm and carries part number 17077. It suits PC builders and enthusiasts who need a reliable interface for memory modules, voltage regulators or chipset heatsinks.

Suitable for custom cooling setups

Builders fitting aftermarket coolers on graphics cards or motherboards will appreciate the pad's adaptability to microscopic scratches and larger surface irregularities. The slightly sticky surface holds position once the protective foil is removed. Users who require a specific thickness not equal to 3mm or a different thermal conductivity rating should look at alternative products.

15x15x3mm single pad capacity

One pad covers a 15mm square area at 3mm thickness, providing enough material for typical VRAM or VRM modules. It can be cut to smaller shapes for multiple smaller chips. The pad handles high thermal loads thanks to its 5W/mk conductivity. Large heatsink bases exceeding the pad dimensions will need additional pieces to cover the full surface.

How it compares

Measured against everything we stock in Thermal Paste, at today’s prices. Recalculated every night.

Price $1.99
Cheaper than about 99% of the 498 comparable items (median $12.99).

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand namePhobya
Model name17077
Part number17077

Questions about this item

What cooler or component surface will the 15x15mm pad sit against?

The 15x15mm pad mounts between a heatsink base and the target chip — VRAM on a graphics card, VRM on a motherboard, or a northbridge/southbridge — filling any microscopic gaps or visible scratches.

Will the pad conform to an older cooler that has a slightly warped base?

Yes, the ultra-soft 5 W/mK material compresses under light pressure and its slightly tacky surface grips both sides, so it seals uneven or warped mating faces without extra force.

How can I confirm the pad is seated correctly after installation?

Remove the protective foil, press the cooler down evenly, then check that the pad has spread to cover the full chip area and shows no trapped air bubbles or lifted edges.

More in Thermal Paste

Similar items