PigHog Cables PHM25 8mm XLR Microphone Cable 25 Feet
A 25-foot XLR microphone cable with an extra-thick 8mm jacket and heat-shrink protected connectors for durable, noise-free performance
- Extra-thick 8mm jacket resists kinks and tangles on stage
- 25-foot length gives flexible reach for live or studio setups
- Custom conductor with full shielding delivers clean audio without interference
- Heat-shrink protected XLR connectors reinforce durability at stress points
- Hand-tested construction backed by lifetime guarantee for long-term reliability
Built for Stage and Studio
The PigHog PHM25 is a 25-foot XLR microphone cable designed for performers and audio professionals who need reliable signal transfer on stage or in the studio. Its extra-thick 8mm rubber jacket resists kinks and tangles during frequent setup and teardown.
Balanced XLR Connection Limits
The cable uses a standard three-pin XLR interface for balanced audio, which rejects common-mode noise over long runs. Signal integrity depends on the quality of the connected preamps and the absence of ground loops in the wider system.
Check Your Routing and Connectors
Verify that your microphone and mixer or interface both use standard XLR three-pin sockets before ordering. Ensure the 25-foot length suits your stage layout or studio routing without leaving excessive slack that could create trip hazards.
How it compares
Measured against everything we stock in Pro Audio Equipment, at today’s prices. Recalculated every night.
- Price $18.99
- Cheaper than about 82% of the 613 comparable items (median $56.99).
Specifications
| Product | |
|---|---|
| Brand name | GENERIC |
| Model name | PHM25 |
Questions about this item
What length of XLR cable should I pick for a medium-sized stage or studio run?
The 25-foot length gives enough reach for most stage positions or studio booths without leaving large coils on the floor.
How does the 8 mm jacket affect everyday handling?
The extra-thick 8 mm rubber jacket resists kinks and tangles, stays flexible when coiling, and survives repeated stepping or rolling during gigs.
What does the heat-shrink protection on the XLR connectors actually prevent?
Heat-shrink strain relief stops the cable from pulling out of the connector housing and shields the solder joints from bending stress.
More in Pro Audio Equipment
Similar items
Black Box EVNPS06B-0003-MM VGA Cable Male/Male 3 ft
- Consumer Electronics
Monoprice Inc. 115428 Pro Sound HDMI Cable 18Gbps 28AWG 60Hz 6ft
- Consumer Electronics





