We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Slender conical soldering tip, 0.2 mm point, 26 mm long, copper finish

Plato

Plato LT1L Soldering Tip 0.2 mm 26 mm 850 °F

SKU CH-Y8DC-Q7YYK

A conical copper soldering tip measuring 0.2 mm wide and 26 mm long, rated for 850 °F and compatible with Weller WSP80 handpieces

  • Product typeLT1L
  • Fine 0.2 mm point reaches tight joints
  • 26 mm length gives extended reach
  • 850 °F rating handles demanding soldering
  • Copper construction transfers heat quickly
  • Fits Weller WSP80, WP80, WXP80 handpieces

Conical Tip for Weller WSP80 Handpieces

This Plato LT1L tip fits Weller WP 80, WSP 80, WSP 80N and WXP 80 handpieces used with WD1002, WD1002T, WR2000VX, WR3000M, WR3000SA, WR3000TA, WT1012, WT1013 and WT1013N stations. The 0.2 mm conical point suits fine soldering work where a narrow contact area is required.

Simple Threaded Installation

The tip screws directly into the compatible handpiece without tools. Ensure the handpiece is cool and the threads are clean before fitting; debris or cross-threading can prevent proper thermal contact and cause premature tip wear.

Verify Handpiece and Station Compatibility

Confirm your handpiece model matches WP 80, WSP 80, WSP 80N or WXP 80 and that your station appears in the supported list. The tip operates up to 850 °F, so the station must be capable of driving that temperature range for the tip to function correctly.

How it compares

Measured against everything we stock in Soldering Irons & Stations, at today’s prices. Recalculated every night.

Price $4.99
Cheaper than about 97% of the 802 comparable items (median $25.99).

Specifications

Product
Brand namePlato
Product typeLT1L

Questions about this item

How can I confirm the LT1L tip is heating correctly after fitting it to my WSP80 iron?

The iron should reach the rated 850 °F maximum operating temperature; verify with a tip thermometer or by observing normal solder flow on a test joint.

What comes with the LT1L tip and what else do I need to use it?

The package contains the single copper conical tip measuring .2 mm wide, 26 mm long with a 4.6 mm outside diameter; a compatible Weller handpiece such as the WP 80, WSP 80, WSP 80N or WXP 80 and a supported station like the WD1002 or WR3000 series are required separately.

Which Plato tip should I choose if I need a finer or broader point than the LT1L?

The LT1L is a .2 mm conical tip; select a different LT-series tip with a larger or smaller width for broader or finer work respectively.

More in Soldering Irons & Stations

Similar items