PocketWizard Miniphone to Miniphone Flash Cable Straight 16
A 16-inch straight cable connects two 3.5 mm miniphone ports for electronic flash synchronization
- Product typeCAMERA ACCESSORIES
- Connects flash units with 3.5 mm miniphone jacks
- Straight-to-right-angle plugs suit tight camera ports
- 16 inch length gives flexible off-camera placement
- Compatible with Broncolor and Elinchrom MicroCompact systems
- PocketWizard build quality ensures reliable sync every shot
Sync Cable for PocketWizard Radios
The PocketWizard Miniphone to Miniphone Flash Cable connects two PocketWizard radio units using their 3.5 mm miniphone sync ports. It is built for photographers who need a wired link between a transmitter and a receiver or between two transceivers for reliable flash triggering.
Straight 16-Inch Length
This cable measures 16 inches and features a straight miniphone plug on each end. The fixed length determines the maximum separation between the connected PocketWizard units, so it suits setups where the radios are mounted close together on a bracket or light stand.
Handles Direct Radio-to-Radio Links
The cord carries the electronic sync signal between compatible PocketWizard devices and works with Broncolor and Elinchrom MicroCompact flash units that accept a 3.5 mm trigger input. It does not extend beyond 16 inches, so photographers needing longer runs or right-angle connectors will require a different cable.
How it compares
Measured against everything we stock in Photo Lighting & Studio Flashes, at today’s prices. Recalculated every night.
- Price $6.99
- Cheaper than about 98% of the 3,696 comparable items (median $57.99).
Specifications
| Product | |
|---|---|
| Brand name | PocketWizard |
| Product type | CAMERA ACCESSORIES |
Questions about this item
What does the 16 inch length mean when the cable is plugged into my flash units?
The 16 inch span gives a short, direct link between two PocketWizard radios or a radio and a flash, keeping the sync signal tight on a bracket or light stand without extra slack.
What does the 3.5 mm miniphone connection cap in practice?
The 3.5 mm miniphone plugs carry the trigger pulse only; they do not transmit power or TTL data, so the link is limited to basic sync timing between compatible PocketWizard, Broncolor or Elinchrom gear.
What physical clearance do the straight and right-angle 3.5 mm plugs need on my flash sync ports?
The straight plug needs inline rear access, while the right-angle plug sits flush against the unit and needs side clearance for the cable to exit cleanly.
More in Photo Lighting & Studio Flashes
Similar items
Manfrotto 015 Adapter 1/4 to 3/8 28mm Male 20mm
- Replaces the Manfro…
- 28 mm Male Adapter
Manfrotto 088 Stand Adapter 1/4-20" to 3/8" 20mm
- Replaces the Manfro…
- Accessories





