D-Link DHP-309AV Powerline Networking AV500 Mini Adapter Starter Kit
- 10/100Base RJ-45
- IEEE802.3/3u, HomeP…
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Converts 802.3af PoE to 12 V 12 W DC with Gigabit data pass-through and isolated protection for non-PoE devices
The PoE Texas GAF-12v12w is a Gigabit PoE splitter that converts IEEE 802.3af power into 12 volts at 12 watts for non-PoE devices. It suits installers who need to run IP cameras, Arduino boards, or media players up to 328 feet from a PoE switch or 48 volt injector without adding local mains wiring.
It replaces a separate wall adapter and short Ethernet run when a PoE switch or injector already exists on the network. The jump is worth it when the target device draws no more than 12 watts at 12 volts and the cable distance stays within the 328 foot Ethernet limit.
Verify the source equipment supports IEEE 802.3af at 44 to 56 volts and that the powered device uses a 5.5 millimetre by 2.1 millimetre barrel connector with centre-positive polarity. Confirm the total cable run does not exceed 328 feet and that the switch or injector can deliver the required 12 watts per port.
Measured against everything we stock in Powerline Adapters & Kits, at today’s prices. Recalculated every night.
| Product | |
|---|---|
| Brand name | PoE Texas |
| Model name | GAF-12v12w |
| Ports & slots | |
| Interface type | Ethernet |
| Power | |
| Power supply | 12 V |
| Size & build | |
| Product dimensions | 2.0 in × 0.75 in × 1.5 in |
| Product weight | 2 oz |
| More details | |
| Powerline speeds | 1000 Gbit/s |
| Connection speeds | 1000 Gbit/s |
The splitter provides a 5.5 mm × 2.1 mm barrel connector that fits most 12 V devices.
Plug the PoE switch cable into the splitter RJ45 input, then run a second Ethernet cable from the splitter RJ45 output to the camera while the barrel plug powers the camera.
The unit supports up to 328 feet of cable between the 802.3af PoE switch or injector and the splitter.
More in Powerline Adapters & Kits
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?