We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Watermelon red PLA filament spool, 1.75 mm diameter, vacuum sealed with desiccant

PrintOxe

PrintOxe Watermelon Red PLA Filament 1.75 mm 1 kg

SKU CH-5045-3E0MK

1.75 mm PLA filament with ±0.03 mm accuracy prints at 180–210 °C on most desktop printers

  • Diameter1.75 mm
  • Product colorRed
  • Main materialPLA
  • Product weight2.2 lb (1 kg)
  • Watermelon red shade adds vibrant colour to prints
  • 75 mm diameter fits most desktop 3D printers
  • Dimensional accuracy ±0.03 mm keeps layers consistent
  • Extrusion range 180 °C – 210 °C suits standard PLA settings
  • Vacuum-sealed spool with desiccant protects filament from moisture

Watermelon Red PLA Filament 1.75 mm

This PrintOxe filament is a 1.75 mm diameter PLA spool weighing 1 kg net. It targets hobbyists and makers who need a reliable material for everyday 3D printing on common desktop machines. The watermelon red colour provides a vivid finish for decorative or prototype parts.

Upgrade from inconsistent budget filament

The spool delivers a dimensional accuracy of +/- .03 mm, reducing the risk of nozzle clogs and uneven extrusion that plague cheaper reels. Vacuum sealing with desiccant keeps moisture out, so the jump is worth it when print failures or brittle layers have been traced to damp or out-of-tolerance filament.

Simple spool mounting and printing

The spool dimensions are 7.80 inch diameter, 2.56 inch width and a 5.59 mm hub hole, fitting most standard holders without adapters. Recommended nozzle temperature is 180 to 210°C. Ensure the printer’s filament path matches 1.75 mm stock and store the reel sealed when not in use to prevent moisture uptake.

How it compares

Measured against everything we stock in 3D Printer Filament, at today’s prices. Recalculated every night.

Price $53.99
Pricier than about 84% of the 305 comparable items (median $27.99).

Specifications

Product
Brand namePrintOxe
Product colorRed
Size & build
Main materialPLA
Diameter1.75 mm
Product weight2.2 lb (1 kg)

Questions about this item

Will the 7.80 inch spool diameter and 2.20 inch hub hole fit my printer's filament holder?

The spool measures 7.80 inches in diameter, 2.56 inches wide, with a 2.20 inch hub hole; verify your holder accepts those dimensions before mounting.

What nozzle temperature range should I set for this 1.75 mm PLA to avoid under-extrusion on the first layer?

Use an extrusion temperature between 180 °C and 210 °C; start near the middle of the range and adjust by 5 °C steps until the first layer lays down smoothly.

How should I store the vacuum-sealed spool after opening to keep the filament from absorbing moisture?

Reseal the spool in its original bag with the included desiccant, or keep it in an airtight container with fresh silica gel between prints.

More in 3D Printer Filament

Similar items