We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver metal projector ceiling mount with flat plate and short arm extending five inches from ceiling surface

Projector Ceiling Mounts Direct, LLC.

Projector Ceiling Mounts Direct, LLC. OPTOMA-EP751-MM projector accessory

SKU CH-BY23-FADZD

Ceiling mount positions Optoma EP751, EP758, EP759 and H57 projectors five inches down with 360-degree rotation and 80-degree tilt

  • Product typeProjector Mounts
  • Precise fit for Optoma EP751, EP758, EP759, H57 models
  • 100% 6061-T6 aircraft aluminium construction for lasting durability
  • +/- 80 degree tilt and 360 degree rotation for flexible positioning
  • Sets projector approximately 5 inches from ceiling with minimal coverage
  • All hardware and detailed instructions included for quick installation

Optoma EP751 EP758 EP759 H57 Ceiling Mount

This ceiling mount is built specifically for Optoma EP751 EP758 EP759 H57 projectors. It uses a CNC-machined plate made from 6061-T6 aircraft aluminium to ensure a precise fit. All required hardware and detailed instructions are included for a straightforward installation on drywall or wooden beams. The projector is not included.

5-Inch Drop with 360-Degree Rotation

The mount positions the projector approximately 5 inches from the ceiling and allows 360-degree rotation plus pitch and roll adjustment. Maximum tilt reaches +/- 80 degrees for flexible aiming. The minimal plate coverage leaves ample space around the projector for heat to escape during operation. This design is not intended for drop or false ceilings.

Replaces Universal Mounts for Listed Models

This accessory replaces generic universal mounts that can obstruct vents or fit loosely on the EP751 EP758 EP759 H57. The upgrade is worth it when you need a secure, model-specific attachment that preserves airflow and simplifies alignment. Buyers with other projector models or those requiring a false-ceiling solution cannot use this mount.

How it compares

Measured against everything we stock in Projector Mounts & Add-Ons, at today’s prices. Recalculated every night.

Price $46.99
Cheaper than about 77% of the 5,120 comparable items (median $52.99).

Specifications

Product
Product typeProjector Mounts

Questions about this item

How do I attach the 6061-T6 aluminium projector plate to my Optoma EP751 and what step is often missed?

Bolt the CNC-machined plate to the EP751 using the included hardware, then secure the arm to a joist or drywall anchor; the step installers skip is verifying the ceiling structure can hold the load before drilling.

Which parts of the OPTOMA-EP751-MM mount will need inspection or replacement over time?

Check the 360-degree swivel joint and +/- 80-degree tilt mechanism periodically for loosened bolts; the 6061-T6 aluminium plate itself does not wear, but the included steel screws may need re-torquing after seasonal thermal cycles.

What is the first limitation I will hit when positioning the Optoma H57 on this mount in a low ceiling?

The fixed 5-inch drop sets the projector 5 inches from the ceiling, so rooms with less than that clearance prevent installation; the mount is not designed for drop or false ceilings.

More in Projector Mounts & Add-Ons

Similar items