ProX X-PC10USB 10 Plug Rack Mount Power Distribution Switch With 2 USB Charging Ports
Rack-mountable 10-outlet 110 V power strip with front circuit breaker and two USB ports at 2.1 and 1.0 A
- 10 rear outlets plus two front USB ports for charging phones and controllers
- 1 A and 1.0 A USB outputs deliver fast power to tablets and accessories
- Front-panel circuit breaker protects connected gear from overloads
- Single rack-space height fits standard 19-inch cabinets without wasting vertical room
- 110 V operation suits North American studio and stage installations
Rack-mount power distribution for DJ rigs
The ProX X-PC10USB fits a single rack unit and provides ten 110v outlets plus two USB charging ports rated at 2.1 amps and 1.0 amps. A front-mounted circuit breaker protects connected gear from overloads. It is aimed at mobile DJs and fixed installations that need clean, centralised power in a compact 19.00" by 5.00" by 2.00" chassis.
Thermals noise and power draw
The unit operates passively with no fans, so it adds no audible noise to a booth or studio. Power draw is limited to the combined load of attached devices up to the breaker rating. The 4.00 lb weight and slim 2.00" height keep rack density high without restricting airflow around neighbouring equipment.
Replaces basic strips and adds USB charging
It upgrades from unprotected power strips by adding surge protection, a resettable breaker and dedicated USB ports for phones or controllers. The jump is worth it when a gig bag or install rack needs ten grounded outlets and device charging in one rack space. Builders who need more than ten outlets or a higher voltage supply should look elsewhere.
How it compares
Measured against everything we stock in DJ Mixing Boards, at today’s prices. Recalculated every night.
- Price $49.99
- Cheaper than about 85% of the 90 comparable items (median $138.49).
Specifications
No published specifications for this item yet.
Questions about this item
How do I mount this unit in a standard rack and which step causes the most issues?
The unit occupies one rack unit and is 19.00 inches wide; the common mistake is forgetting to secure all four mounting screws so the front circuit breaker stays aligned.
What part will need replacement first with regular use?
The front-mounted circuit breaker is the only user-serviceable protection device and will trip before any internal component fails.
What limit appears first when the strip runs continuously at full load?
The 110v supply and combined USB output of 2.1 amps and 1.0 amps set the maximum sustained current before the breaker opens.
More in DJ Mixing Boards
Similar items
M-Wave MWSMCMIXERW Wireless MIDI Controller 8 Knobs DJ Mixer
- Mixer
- Portable, Bluetooth…
micfuns M-5 3-channel DJ mixer 48V phantom Bluetooth USB
- 3, XLR, USB, AC, M-…
- XLR, USB
BOMGE 04F 4-channel DJ mixer Bluetooth 5.0 48V phantom power
- 5 V, Corded Electric
- 4, Microphone Music…





