ProX XC-PR05 5 ft 1/4 to RCA Cable
Connects devices with 1/4" and RCA ports using 5 ft oxygen-free copper cable with 93% braided shielding and gold-plated connectors
- 5 ft length connects RCA and 1/4 inch devices
- 93% braided OFC copper shield cuts noise
- 20 AWG OFC conductors keep signal pure
- Gold and silver plated metal connectors last
- Tour‑grade flexible build survives bending and twisting
ProX XC-PR05 1/4 to RCA Cable
This five-foot cable connects devices with 1/4-inch outputs or inputs to equipment using RCA connections. It suits live sound engineers and touring professionals who need a reliable link between mixing consoles, interfaces, or amplifiers and consumer-grade audio gear. The unbalanced design fits standard mono signal paths in professional audio setups.
Capacity and signal handling
Two 20 AWG oxygen-free copper conductors carry the audio signal with a 93 percent braided copper shield that reduces noise interference. The compact diameter limits eddy currents to preserve signal integrity across the run. Gold and silver-plated metal connectors ensure low-resistance contact for clean transfer. Unbalanced topology means hum rejection is limited on very long runs or in electrically noisy venues.
Build quality and daily use
The tour-grade jacket resists repeated bending and twisting without fatigue, built to survive frequent coiling and stage handling. All-metal connector shells withstand physical stress better than moulded plastic alternatives. The flexible construction lays flat on stage or in racks, easing cable management during load-in and strike. Fixed connector orientation requires careful routing where space behind rack ears is tight.
How it compares
Measured against everything we stock in PA Systems & Powered Speakers, at today’s prices. Recalculated every night.
- Price $15.99
- Cheaper than about 91% of the 224 comparable items (median $67.99).
Specifications
No published specifications for this item yet.
Questions about this item
Will the 1/4" connector fit the combo jack on my older mixer without an adapter?
The cable terminates in a standard 1/4" plug and an RCA plug, so it connects directly to equipment with those exact ports; no adapter is included for XLR or other jack types.
How can I confirm the 93% braided OFC shield is delivering clean signal after I hook it up?
Play audio through the link and listen for hum or radio-frequency noise; the 93% braided OFC copper shield and 20 AWG OFC conductors are designed to suppress interference and preserve signal integrity.
What comes in the package besides the 5 ft 1/4" to RCA cable itself?
Only the finished cable with its gold/silver-plated metal connectors is supplied; no extra adapters, pouches or documentation are included.
More in PA Systems & Powered Speakers
Similar items
Goldwood Sound GT-25 3.5" Kapton Tweeter Pair 80W 8ohm
- Speaker





