Pyle 8 Channel UHF Wireless Microphone System with 4 Handheld, 4 Headset, 4 Belt Pack, 4 Lavalier Mics
An 8-channel UHF wireless system supplying four handheld, four headset, four belt-pack and four lavalier microphones with independent volume controls and up to 600 ft range
- Eight-channel UHF system covers up to 600 ft for clear wireless audio
- Four handheld, four headset, four belt-pack and four lavalier mics included
- Independent volume controls on each channel for precise level adjustment
- Rack-mountable receiver with XLR balanced and 1/4" mixed outputs for flexible connectivity
- Universal 110/240 V power supply works worldwide without a voltage converter
Eight-channel UHF wireless system
The Pyle system delivers eight independent UHF channels in a single rack-mountable receiver. Four handheld microphones and four belt-pack transmitters with headset or lavalier options give performers, presenters and event crews cable-free movement on stage or in conference rooms.
600-foot operating range and headroom
Each channel transmits clear audio up to 600 feet under typical conditions, with independent volume controls and RF/AF signal indicators on the receiver. The fixed-frequency design keeps setup simple, but the eight channels share the same UHF band, so dense RF environments can reduce the practical number of simultaneous clean channels.
UHF band constraints and licensing
Operation uses unlicensed UHF spectrum governed by low-power rules; the system must not cause harmful interference and has no protection from other devices. FCC regulations are under review, so future rule changes may affect usable frequencies or require coordination in some venues.
How it compares
Measured against everything we stock in Wireless Microphone Systems, at today’s prices. Recalculated every night.
- Price $482.99
- Pricier than about 78% of the 119 comparable items (median $114.99).
Specifications
No published specifications for this item yet.
Questions about this item
Will the 600 ft UHF range reach the back of our hall if I keep my existing wired mics plugged into the same mixer?
Yes — the receiver provides both a mixed 1/4'' output and individual XLR balanced outputs, so the eight wireless channels can feed the same mixer inputs your wired mics already use without any conflict.
How can I confirm each of the eight channels is receiving a clean signal once the rack is powered up?
The front panel shows independent AF and RF signal indicators per channel; a lit RF light means the transmitter is linked, and the AF meter moves with voice level so you can verify audio is passing.
Which pieces ship in the box and what must I supply myself?
The box includes the rack-mount receiver, four handheld mics, four belt-pack transmitters, four headset mics and four lavalier mics; you only need to provide AA batteries for each transmitter and standard XLR or 1/4'' cables to connect the receiver outputs to your mixer.
More in Wireless Microphone Systems
Similar items
Sony C-80 dual-diaphragm condenser microphone 2.0500
- Condenser Microphon…
BFKK Retekess T130 Wireless Tour Guide System 1 Transmitter 15 Receivers 99 Channels
- Bluetooth





