We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Grey aluminum horn speaker with mounting bracket, 11 inch diameter, rectangular prism shape

Pyle PHSP121T 30 W 11 in PA horn speaker 8 Ω 70 V transformer

SKU CH-0397-W2X8N

An 11-inch PA horn speaker delivering 30 watts with a 70 V transformer tappable at 30, 15 and 7.5 watts, 8 Ω impedance and 103 dB SPL

  • Power draw30 W
  • Accessory categoryMounting bracket and installation hardware
  • Spec summaryMounting bracket and installation hardware, Pyle, 30 W, 8 oh
  • Team affiliation1 Piece
  • Impedance8 ohm
  • Audio inputsWired, Bluetooth
  • Delivers clear projection with 30 W output power
  • Covers vocal range using 400 Hz to 5 kHz response
  • Integrates into 70 V systems via multi-tap transformer
  • Mounts quickly with included bracket and hardware
  • Resists wear through aluminium housing construction

Compact horn speaker for public address

The Pyle PHSP121T is an 11 inch aluminium horn speaker rated at 30 watts with an 8 ohm impedance. It includes a 70 volt transformer with taps at 30, 15 and 7.5 watts for distributed audio systems. A mounting bracket and installation hardware are supplied for ceiling or wall placement.

Sustained output in distributed systems

The 70 volt transformer lets the speaker draw only the tapped power needed for each zone, reducing line loss on long cable runs. Frequency response spans 400 Hz to 5 kHz with a sensitivity of 103 dB, so voice announcements remain intelligible over extended periods without amplifier clipping.

Check amplifier and wiring before ordering

Verify your amplifier provides a 70 volt line output and can supply the total tapped wattage of all connected horns. Confirm the mounting surface can support the 5.43 lb weight and that the 13.1 inch depth fits the installation cavity. The unit is not water resistant, so choose a sheltered location for outdoor use.

How it compares

Measured against everything we stock in PA Systems & Powered Speakers, at today’s prices. Recalculated every night.

Price $77.99
Typical for this category: the median of 224 items is $67.99.

Specifications

Product
Brand namePyle
Model namePHSP121T
Part numberPHSP121T
Product typeDynamic Microphones
Accessory categoryMounting bracket and installation hardware
Audio & video
Impedance8 ohm
Audio inputsWired, Bluetooth
Audio outputsStereo
Driver sizeOutdoor
Power
Power draw30 W
Power output30 W
Power supplyCorded Electric
Size & build
Measurements120 × 120 × 25 mm 4.72 × 4.72 × 0.98 in
Product weight2463 g
In the box
Package contentsMounting bracket and installation hardware
More details
Team affiliation1 Piece

Questions about this item

How much power does the 70 V transformer draw when the speaker runs all day?

The 70 V transformer is tappable at 30, 15 or 7.5 watts so continuous draw depends on the tap you select.

What amplifier output is required to drive the 8 Ω horn?

Any amplifier rated for 8 Ω loads and able to supply up to 30 W will drive the speaker.

Can the 11 in horn be used with an existing 70 V line that already has older paging horns?

Yes, the 70 V transformer taps at 30, 15 or 7.5 W so it connects in parallel with other 70 V horns on the same line.

More in PA Systems & Powered Speakers

Similar items