We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Pyle

Pyle PLMRSBA8 8" 600W Slim Active Marine Car Subwoofer

SKU CH-135J-FXF1V

An 8-inch slim active subwoofer with built-in 600W peak amplifier, marine-grade waterproof construction and adjustable low-pass crossover from 50 to 150Hz

  • Subwoofer size8 in (20.3 cm)
  • Peak wattage600 W
  • RMS power rating90 W, Slim Woofer: 100 W
  • Frequency range50 Hz–150 Hz
  • Crossover pointAdjustable Low Pass Filter: 50–150 Hz
  • EnclosureLow-Profile, Slim Design
  • 8" slim profile fits under seats and tight spaces
  • 600 W peak power with 100 W RMS for strong bass
  • Marine-grade waterproof construction withstands moisture and spray
  • Adjustable low-pass crossover 50–150 Hz plus 0 to +12 dB bass boost
  • Remote level control lets you tune bass from the driver seat

Compact marine subwoofer for tight spaces

The Pyle PLMRSBA8 is an 8-inch slim active subwoofer built for under-seat or low-profile installations in boats and vehicles. Its marine-grade waterproof construction withstands moisture and splashes while the integrated amplifier removes the need for a separate amp. A remote level control lets you adjust bass from the driver position.

Upgrade from passive or non-marine subs

This unit replaces a passive subwoofer that would require an external amplifier and extra wiring, saving space and install time. The jump is worth it when you need waterproof durability plus a self-contained 100W RMS amplifier in a 12.8" x 9.5" x 3" enclosure that fits where larger boxes cannot.

Limits of the built-in amp and crossover

The onboard amplifier delivers 100W RMS with a peak rating of 600W, so output is constrained by that power ceiling rather than by a separate amp choice. The adjustable low-pass filter operates between 50 and 150Hz, and input sensitivity ranges from 0.12V to 3.5V, defining the signal levels and frequency band the system can accept.

How it compares

Measured against everything we stock in Car Subwoofers & Enclosures, at today’s prices. Recalculated every night.

Price $112.99
Cheaper than about 69% of the 268 comparable items (median $185.49).

Specifications

Product
Brand namePyle
Product typeCar Audio Subwoofers
Product colorBlack
Audio & video
RMS power rating90 W, Slim Woofer: 100 W
Frequency range50 Hz–150 Hz
Power
Peak wattage600 W
Size & build
Subwoofer size8 in (20.3 cm)
Product dimensions12.8 in × 9.5 in × 3 in
In the box
Box volumeCompact
Package contentsAmplified Subwoofer
Remote Subwoofer Level Control
Remote Subwoofer Control Cable
Hi-level Input Wire
Mounting Hardware
More details
Crossover pointAdjustable Low Pass Filter: 50–150 Hz
EnclosureLow-Profile, Slim Design
Number of wooferSingle

Questions about this item

How much clearance do I need under the seat for the 12.8" x 9.5" x 3" enclosure?

The enclosure measures 12.8 inches long, 9.5 inches wide and 3 inches high, so you need at least that much flat space plus room for the wiring harness and the mounting brackets that ship with it.

Which wires must be connected for high-level speaker input and where does the remote level knob plug in?

Use the supplied hi-level input wire to tap the factory speaker leads, set the adjustable input sensitivity between 0.12 V and 3.5 V, then plug the remote subwoofer control cable into the dedicated jack on the amplifier panel.

What should I check if the red protection LED lights up after the install?

The red LED signals overload, thermal or short-circuit protection; verify the power and ground connections, ensure the impedance load is correct, and let the built-in amplifier cool before restarting the system.

More in Car Subwoofers & Enclosures

Similar items