We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
RAPTOR PRO SERIES 3800W 1/0 AWG amp kit with cables and fuse holder

RAPTOR

RAPTOR PRO SERIES 3800W 1/0 AWG Amp Kit with 17FT RCA Cable

SKU CH-M95A-YN643

Complete amplifier installation kit with 3800W capacity, 1/0 AWG oxygen-free copper power and ground cables, 17FT dual-twist RCA interconnect, turn-on wire, 200A ANL fuse holder.

  • Oxygen-free copper cables maximise signal transfer
  • 3800-watt kit handles high-power amplifier demands
  • 200-amp ANL fuse protects the electrical system
  • Nickel-plated ring terminals ensure secure connections
  • 17-foot RCA and power cables simplify routing

3800W Amp Kit for High-Power Car Audio

The RAPTOR PRO SERIES 3800W kit supplies the heavy-gauge wiring needed for high-output amplifier installations. It includes oxygen-free copper power and ground cables plus a dual-twist RCA interconnect. The kit targets installers building competition or enthusiast systems that demand low-resistance current paths.

1/0 AWG Power with 200 AMP Fuse Protection

A 17-foot 1/0 AWG OFC power cable and 3-foot matching ground cable deliver ample cross-section for multi-kilowatt loads. The included ANL fuse holder carries a 200 AMP fuse to protect the vehicle electrical system. This gauge combination handles sustained high current but reaches its limit when amplifier draw exceeds the fuse rating.

17FT RCA and Turn-On Wire Simplify Routing

The 17-foot dual-twist RCA cable rejects noise on long runs to rear-mounted amps, while the 18 AWG turn-on lead triggers the amplifier reliably. Four nickel-plated 1/0 AWG ring terminals and mounting hardware complete the connection points. Installers needing longer ground runs or additional distribution blocks must source those separately.

How it compares

Measured against everything we stock in Amp Wiring Kits & Install Parts, at today’s prices. Recalculated every night.

Price $126.99
Pricier than about 91% of the 259 comparable items (median $12.99).

Specifications

Product
Brand nameRAPTOR

Questions about this item

Will the 1/0 AWG power cable handle the draw from my existing 3800W amplifier without voltage drop?

The kit supplies a 17FT 1/0 AWG oxygen-free copper power cable and a 200 AMP ANL fuse holder, matching the 3800W rating for clean power delivery.

How can I verify the 17FT dual twist RCA cable is passing a clean signal after installation?

Play a test tone and check for zero noise floor; the oxygen-free copper conductors and twisted-pair geometry are designed to reject interference and preserve signal integrity.

Does the box include every connector needed to terminate the 1/0 AWG cables, or must I buy ring terminals separately?

Four nickel-plated 1/0 AWG seamed ring terminals are included, plus the ANL fuse holder, 3FT ground cable, 17FT turn-on wire and all mounting hardware.

More in Amp Wiring Kits & Install Parts

Similar items