Red Hat 8215B060CSA Drain Trap, 1-1/4 in, 25 psi, Cv 32, 110/120V AC
A 2-way normally closed solenoid valve with 1-1/4 in pipe size, Cv 32 and 25 psi max pressure for air or inert gas at 110/120V AC
- Product typeDrain Components
- Main materialHAWA
- High flow capacity with a Cv of 32
- Handles up to 25 psi air and inert gas pressure
- 2-way normally closed operation for reliable shutoff
- Aluminium body construction for durability
- Operates on 110/120V AC power supply
Product Identity
The Red Hat 8215B060CSA is a 2-way normally closed solenoid valve built for drain and trap installations. It operates on 110/120V AC and carries a Cv rating of 32 with a maximum pressure differential of 25 psi for air or inert gas. The valve body is aluminium with NBR seals and a 1-5/8 in orifice.
Best Fit and Limits
This valve suits systems that need on-off control of air or inert gas at moderate pressure through a 1-1/4 in nominal pipe size. It is not intended for fuel gas or fuel oil service, and buyers who require higher pressure ratings or different seal materials should look elsewhere.
Sustained Operation
Under continuous duty the coil remains energised at the rated AC voltage while the aluminium body dissipates heat from the flowing media. The NBR seals maintain their integrity at the specified pressure differential, and the normally closed design returns to a sealed state instantly when power is removed.
How it compares
Measured against everything we stock in Drain Stoppers, Strainers & Traps, at today’s prices. Recalculated every night.
- Price $414.99
- Pricier than about 90% of the 4,240 comparable items (median $31.99).
Specifications
| Product | |
|---|---|
| Brand name | Red Hat |
| Model name | 8215B060CSA |
| Product type | Drain Components |
| Size & build | |
| Main material | HAWA |
Questions about this item
What pipe size and voltage supply must already be in place for the 8215B060CSA to install and operate?
The valve requires a 1-1/4 inch nominal pipe connection and a 110/120V AC power source to function.
Will the 25 psi pressure rating of this valve handle the same line pressure as my existing 60 psi system components?
No, the maximum operating pressure differential for air or inert gas is 25 psi, which is lower than a 60 psi system.
How can I confirm the 8215B060CSA is actuating correctly after wiring and plumbing it?
Apply 110/120V AC to the coil and verify the normally closed valve opens, allowing flow through the 1-5/8 inch orifice.
More in Drain Stoppers, Strainers & Traps
Similar items
Zoeller E264 4/10 HP 230V Manual Submersible Sewage Pump
- Drain Components
Dayton 3BB75 3/4 HP 1-1/2" Submersible Sump Pump 120V AC
- Drain Components
Banjo RB300-150 3 inch MNPT x 1-1/2 inch FNPT Reducing Bushing Schedule 80 trap
Dynaquip Controls 1" FNPT 316 Stainless Steel Electronic Ball Valve 2-Way Trap
- Transparent





