Red Hat 8263H125LT Solenoid Valve Trap 3/8 in 110/120V AC
2-way normally-closed solenoid valve with 3/8 in brass body, PTFE seals, 0.88 Cv and 40 psi max air pressure, operating on 110/120 V AC
- Product typeDrain Components
- Main materialHAWA
- 3/8 inch pipe size fits standard plumbing connections
- Normally closed design stops flow until energized for safety
- Brass body with PTFE seals resists corrosion and wear
- Operates on 110/120V AC for common power compatibility
- 88 Cv rating handles air and inert gas up to 40 psi
Application and purpose
The Red Hat 8263H125LT is a normally closed two-way solenoid valve designed for draining air or inert gas lines in industrial and commercial plumbing systems. It suits maintenance engineers and plant operators who need reliable on-off control of condensate or process fluids through a 3/8 in pipe connection.
Pressure and voltage limits
The valve operates on 110V AC or 120V AC supply and handles a maximum operating pressure differential of 40 psi for air and inert gas. Fuel gas and fuel oil service are not rated, so the valve must not be used in those media. Brass body and PTFE seals provide chemical compatibility within the stated pressure range.
Deciding specification
The 9/32 in orifice and 0.88 Cv coefficient determine the flow capacity for a given pressure drop. If the system requires a different flow rate or pressure rating, this model will not match the application.
How it compares
Measured against everything we stock in Drain Stoppers, Strainers & Traps, at today’s prices. Recalculated every night.
- Price $366.99
- Pricier than about 90% of the 4,240 comparable items (median $31.99).
Specifications
| Product | |
|---|---|
| Brand name | Red Hat |
| Model name | 8263H125LT |
| Product type | Drain Components |
| Size & build | |
| Main material | HAWA |
Questions about this item
Should I choose the 110 V or 120 V coil for my 120 V supply?
The coil is rated for both 110 V AC and 120 V AC, so a single unit covers either nominal voltage.
What flow can I expect with a 1 psi pressure drop through this valve?
The Cv of 0.88 means roughly 0.88 US gallons per minute of water at a 1 psi differential.
Does the 3/8 in pipe size limit the maximum pressure I can use?
The pipe size is 3/8 in, but the pressure limit is 40 psi for air or inert gas regardless of connection size.
More in Drain Stoppers, Strainers & Traps
Similar items
Mueller Industries, Inc. 620F 7/8 in OD 60 ft L trap
- Drain Components
Banjo RB300-150 3 inch MNPT x 1-1/2 inch FNPT Reducing Bushing Schedule 80 trap
Dayton 4FZJ9 Backdraft Damper 30 in 33 in 5.4 sq ft 2500 fpm
- Drain Components





