We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Champagne Bronze cabinet pull with beaded rings 96 mm center-to-center length 111 mm projection 45 mm

RICHELIEU

RICHELIEU Firenze 3 3/4-inch (96 mm) Champagne Bronze hardware

SKU CH-SPM6-RWFY7

A 96 mm centre-to-centre cabinet pull in Champagne Bronze Zamak with beaded-ring detailing and included 25 mm mounting screws

  • Product typeCabinet & Drawer Hardware
  • Champagne Bronze finish adds warm gold tone to cabinets
  • 96 mm centre-to-centre fits standard 3 3/4 in drilling
  • 111 mm overall length suits wider drawer fronts
  • 45 mm projection gives comfortable grip clearance
  • Zamak construction with included 8/32 screws for secure mounting

Firenze Champagne Bronze pull

This RICHELIEU Firenze pull measures 3 3/4 in centre-to-centre and 4 3/8 in overall length. The Champagne Bronze finish is applied to a Zamak body and projects 1 3/4 in from the surface. It is sold individually with 8/32 mounting screws included for immediate fitting.

Suits standard 96 mm drilling

The 96 mm hole spacing matches common cabinet and drawer layouts, while the 13/16 in width and 1 3/4 in projection suit most door thicknesses. The supplied 1 in quadrex pan-head screws cover melamine panels from 5/8 in to 3/4 in thick. Builders needing a different hole pitch or a non-metallic finish should consider other ranges.

Centre-to-centre 96 mm decides fit

The 96 mm centre-to-centre dimension is the single measurement that determines whether this pull aligns with existing drill holes. Verify this spacing before ordering to avoid re-drilling or misalignment.

How it compares

Measured against everything we stock in General Hardware & Accessories, at today’s prices. Recalculated every night.

Price $6.99
Cheaper than about 91% of the 2,607 comparable items (median $18.99).

Specifications

Product
Brand nameRICHELIEU
Product typeCabinet & Drawer Hardware

Questions about this item

Does the Champagne Bronze Zamak finish get hot or noisy after constant kitchen use?

No — it is a solid metal pull with no moving parts, no electronics and no power draw, so it produces zero heat and zero noise regardless of how long the drawer stays open.

What must I already have to install the 96 mm centre-to-centre pull?

A drill, a 3/16 in bit for the two 96 mm spaced holes and a screwdriver for the included 8/32 × 25 mm quadrex pan-head screws; the screws suit carcass thicknesses of 16 mm to 19 mm.

Will the 111 mm long, 45 mm projection pull clear the 13 mm bead-and-ring detailing on adjacent older hardware?

The pull extends 45 mm from the face; measure the gap between the new 96 mm hole centres and the old hardware to confirm the 20 mm wide backplate and finger clearance do not clash.

More in General Hardware & Accessories

Similar items