Rosewill VNG650 650W 80+ Gold ATX 3.1 Non-Modular Power Supply
- 650 W
- 1 × 120 mm
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
A 1000 W ATX 3.1 power supply with full modular cables, 80 PLUS Gold efficiency, a 120 mm FDB fan and a native 12V-2x6 connector for PCIe 5.1 graphics cards in a compact 140 mm chassis
Model ATX 3.1 80+ Gold (1000W)
The Rosewill VMG1000 delivers 1000 W of continuous power and meets the ATX 3.1 specification. It is built for systems that need a single 12 V rail and a native 12+4 pin 12V-2x6 connector for modern graphics cards. Full modular cabling keeps the interior tidy.
A 120 mm FDB fan and a steel shell with large vents move air through the 140 mm deep chassis. The unit carries 80 PLUS Gold certification with up to 85 % typical efficiency. Active PFC and a 16 ms minimum hold-up time help maintain stable output during normal operation.
The platform is rated for 235 % power excursion and 300 % GPU power excursion, allowing short bursts well above the 1000 W rating. A six-protection suite covers over-current, over-power, over-temperature, over-voltage, short-circuit and under-voltage conditions. The dedicated 12V-2x6 cable can supply 600 W directly to a compatible GPU.
Measured against everything we stock in ATX Desktop Power Supplies, at today’s prices. Recalculated every night.
New to this? Buying PC parts with Monero — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | Rosewill |
| Model name | VMG1000 |
| Product type | ATX 3.1 Compatible |
| Graphics | |
| CrossFire support | Ready |
| Ports & slots | |
| SATA power connectors | 6 |
| Output type | +3.3 V@18A, +5 V@18A, +5VSB@3A |
| Power | |
| Max wattage | 1000 W |
| Power efficiency | Up to 85% |
| Modular cabling | Full Modular |
| Power factor correction | Active |
| Main power connector | 20+4Pin |
| 12V rails | Single |
| Power hold-up time | 16 ms min. |
| Efficiency certification | 80 PLUS GOLD Certified |
| Overvoltage protection | Yes |
| Overload protection | Yes |
| Size & build | |
| Shipping weight | 2.52 kg |
| Package size | 273 × 203 × 114 mm |
| Compatibility | |
| PSU length limit | 140 mm |
| More details | |
| Fan configuration | 1 × 120 mm FDBfan |
Other versions of this model
Connect the 12+4-pin 12V-2x6 cable from the PSU directly to the GPU; the step often missed is seating the connector fully until the latch clicks, ensuring all 12 power pins and 4 sense pins make contact.
The fluid-dynamic-bearing fan is rated for long life; typical maintenance is occasional dust removal with compressed air, and replacement is only needed if bearing noise or speed drop appears after many years.
The 16ms minimum hold-up time is the first hard limit; if AC input drops, output voltage is guaranteed for at least 16ms before falling out of regulation.
More in ATX Desktop Power Supplies
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?