Ruth's sister HDMI Extender over Cat5e/6 1080P 30m Pair
Extends 1080p HDMI signals up to 30 metres over Cat5e or Cat6 cable with plug-and-play setup
- Extends 1080p video up to 30 metres using Cat-5e/6 cable
- Plug-and-play pair works instantly without any configuration
- Supports 3D 1080p and 4k×2k resolutions at 1.65 Gbps signalling
- HDCP 1.1 and 1.2 compliance protects premium content playback
- Compact dual RJ45 adapters replace long HDMI runs for tidy installs
HDMI Extender over Cat5e/6 30 m
This pair of HDMI-compatible extenders transmits 1080p signals up to 30 metres using Cat5e or Cat6 UTP cable. Each unit carries a male HDMI connector and dual RJ45 ports for a single-link run. No configuration is required; the modules work as a plug-and-play set.
Sustained transmission behaviour
The extender maintains a signalling rate of 1.65 Gbps to support continuous 1080p playback without handshake drops. HDCP 1.1 and 1.2 compliance keeps protected content flowing during long sessions. Hot-plug capability allows source or display changes without power cycling the link.
Thermals noise and power draw
Hard-plastic housings passively dissipate the low heat generated by the conversion circuitry. No fans or active cooling are present, so operation is silent in typical AV racks or behind displays. Power is drawn from the HDMI source ports, eliminating external adapters.
How it compares
Measured against everything we stock in Worldwide Power Cords, at today’s prices. Recalculated every night.
- Price $9.99
- Typical for this category: the median of 1,208 items is $9.99.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
No published specifications for this item yet.
Questions about this item
Does the extender generate noticeable heat or noise when running continuously?
The units are passive with no fans or active cooling, so they run silently and produce only minimal warmth during all-day operation.
What cables and power sources do I need to supply myself for a working link?
You must provide two Cat-5e or Cat-6 patch cables up to 30 metres long; the extenders draw power from the HDMI source and display, so no external adapters are required.
Will this pair work with an older 720p projector that only supports HDCP 1.1?
Yes, the extender supports HDCP 1.1 and 1.2 and passes 720p, 1080i and 1080p signals, so your projector will display correctly.
More in Worldwide Power Cords
Similar items
TeKit whytr-1932 C14 to C13 + NEMA 5-15R Y Splitter 1ft
- C14 to C13/5-15R 1…
- Type





