We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Three black flexible FPC antennas with IPEX connectors

sakose

sakose 3-piece 2.4 GHz 4 dBi FPC IPEX network antenna

SKU CH-T6V3-6WWTM

Three flexible 2.4 GHz FPC antennas with IPEX connectors add 4 dBi gain to Wi-Fi modules

  • Product typeM.2 Wi-FI Adapter
  • Product colorBlack

Version N/A

Wireless Speed N/A

  • Covers 2.4 GHz wifi 2 networks with 2400-2500 MHz range
  • 4 dBi gain boosts signal strength for wireless links
  • 50 ohm impedance matches standard RF circuits for efficient transfer
  • 5 standing wave ratio keeps reflections low across the band
  • Flexible FPC panel with adhesive backing fits tight internal spaces

Three-piece 2.4 GHz IPEX antenna kit

This three-piece kit supplies flexible FPC antennas with IPEX connectors for 2.4 GHz wifi 2.4 devices. Each unit delivers 4 dBi gain across the 2400-2500 MHz band with 50 ohm impedance and 1.5 standing wave ratio. The set suits builders adding wireless to embedded boards, router modules or notebook upgrades.

Peel-and-stick FPC with IPEX plug

The 42 by 12 by .3 mm panels use adhesive-backed FPC material and ship with RG1.13 pigtails ending in IPEX heads. No soldering is required; simply route the thin cable and press the connector onto the matching socket. Take care not to kink the feeder or exceed the 10 W power rating during testing.

Verify connector generation and clearance

Confirm the host device uses a first- or fourth-generation IPEX socket before ordering. Ensure at least 42 by 12 mm of flat internal space for the panel and a path for the 5 cm pigtail. The linear-polarisation design works with 802.11 b/g/n MIMO systems but will not cover 5 GHz bands.

How it compares

Measured against everything we stock in Wi-Fi Antennas & Wireless Bridges, at today’s prices. Recalculated every night.

Price $4.99
Cheaper than about 97% of the 399 comparable items (median $31.99).

Specifications

Product
Brand nameSakose
Product typeM.2 Wi-FI Adapter
Product colorBlack

Other versions of this model

3 more in the same range

Questions about this item

How can I confirm the antenna is performing correctly after installation?

Measure signal strength across the 2400-2500 MHz band; a standing wave ratio at or below 1.5 and expected gain near 4 dBi indicate proper operation.

What items are included and what must I source separately?

The pack contains three FPC antennas with IPEX connectors and 5 cm RG1.13 pigtails; mounting adhesive is pre-applied, but the host device with a matching IPEX socket must be supplied by you.

Which version suits a 2.4 GHz Wi-Fi module needing 4 dBi gain and IPEX connection?

This single variant delivers 4 dBi gain, 50 ohm impedance and linear polarization on the 2.4 GHz band, matching modules that specify those exact parameters.

More in Wi-Fi Antennas & Wireless Bridges

Similar items