SAMA XPH850-AP 850W ATX 3.1 power supply
- 850 W
- ATX 3.1 Compatible
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Fully modular 1000 W ATX 3.1 unit with Cybenetics Platinum efficiency, native 12V-2x6 PCIe 5.1 connector for 600 W GPU power, 140 mm FDB fan with fanless mode below 60 % load.
Model P1000W Black
This SAMA XPH1000-AP unit delivers 1000W through an ATX 3.1 design with a single +12V rail. Cybenetics Platinum certification confirms 92% or higher efficiency at typical loads. The fully modular cabling uses 100% Japanese capacitors for stable output. A 140mm FDB fan provides cooling with a semi-passive mode below 60% load or 55°C.
The native 12V-2x6 connector supplies up to 600W to PCIe 5.1 graphics cards without adapters, replacing units that rely on 6+2-pin bundles. ATX 3.1 compatibility handles transient spikes up to 235% of rated power, a margin older ATX 3.0 or 2.x designs cannot guarantee. Hold-up time exceeds 16ms at full load for cleaner power-loss transitions.
The 150mm depth fits small-form-factor cases while still powering RTX 40 and 50 series GPUs directly. Builders needing only SATA drives and legacy peripherals will find two SATA connectors and three 6+2-pin PCIe leads included. Systems requiring more than two SATA devices or additional EPS cables should verify cable kit availability before purchase.
Measured against everything we stock in ATX Desktop Power Supplies, at today’s prices. Recalculated every night.
New to this? Buying PC parts with Monero — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | SAMA |
| Product line | P-Series |
| Model name | XPH1000-AP |
| Part number | P1000-BKPFF001-US |
| Product type | ATX 3.1 Compatible |
| Product color | Black |
| Ports & slots | |
| PCIe power connectors | 3 × 6+2-Pin |
| SATA power connectors | 2 |
| Output type | 1000 W |
| Connection types | 1 × 24 pin ATX |
| Power | |
| Max wattage | 1000 W |
| Power efficiency | > 90% |
| Modular cabling | Yes |
| Power factor correction | Active |
| Main power connector | 24Pin |
| 12V rails | Single |
| Power hold-up time | > 16 ms @ 100% load |
| Efficiency certification | Cybenetics Certified |
| Overvoltage protection | Yes |
| Overload protection | Yes |
| Supply voltage | 100–240 V |
| Size & build | |
| Top fans size | 140 mm |
| Shipping weight | 3.04 kg |
| Package size | 318 × 198 × 127 mm |
| Compatibility | |
| PSU length limit | 150 mm |
| More details | |
| Fan configuration | 1 × 140 mm |
| Mean time between failures | >100,000 h |
| Top fans bearing type | Fluid Dynamic Bearing |
Other versions of this model
The unit measures 150 mm deep, so the case must provide at least that much clearance behind the mounting bracket.
Plug the supplied 12V-2x6 cable directly into the PSU and GPU; the common error is leaving the 600 W cable unseated or using an adapter instead.
Dust the fan blades once a year; the fluid-dynamic bearing is rated for long life, so replacement is only needed if noise or vibration appears.
More in ATX Desktop Power Supplies
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?