Crucial CT2K8G3S160BM 16GB (2 x 8GB) DDR3 1600 SO-DIMM memory upgrade
- 16 GB (2 × 8 GB)
- DDR3 1600
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
An 8 GB registered DDR4 ECC module running at 2133 MT/s with CL15 latency and 1.2 V operation
This 8GB DDR4 module is built for servers and workstations that require error-correcting registered memory. It operates at 2133 MT/s with a CAS latency of 15 at 1.20V. The single-rank x4 organisation uses a 288-pin form factor. Buyers needing non-ECC or unbuffered DIMMs for consumer platforms cannot use this module.
The registered buffer and on-die ECC are the decisive specifications for compatibility. The module presents a 1Rx4 configuration with an 8-bit parity signal for error correction. Registers retime clock, command and control signals to reduce electrical load on the memory controller. Systems that require unbuffered memory or a different rank structure will not accept this DIMM.
Under sustained load the module maintains its rated 2133 MT/s speed and CL15 timing at the standard 1.20V. The registered design helps signal integrity across fully populated channels during long compute runs. Thermal behaviour follows the DDR4 specification for registered DIMMs. No higher speeds or lower latencies are supported beyond the rated figures.
Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | SAMSUNG |
| Product line | Server Memory |
| Model name | SAMSUNG:M393A1G40DB0-CPB SAMSUNG:M393A1G40EB1-CPB CRUCIAL:CT8G4RFS4213 HYNIX:HMA41GR7MFR4N-TF KINGSTON:KVR21R15S4/8 |
| Total capacity | 8 GB |
| Product type | 288-Pin DDR4 SDRAM |
| Performance | |
| Rated speed | DDR4 2133 (PC4 17000) |
| Processor | |
| Chipset | Major Brand Chipset |
| Memory | |
| CAS latency | CL15 |
| ECC support | Yes |
| Buffer type | Registered |
| Memory rank | 1Rx4 |
| Power | |
| Rated voltage | 1.2 V |
| Compatibility | |
| Compatible systems | M393A1G40DB0-CPB |
The PC4-17000 rating means a peak transfer rate of 17 GB/s per module, so an 8 GB stick delivers that bandwidth when the memory controller runs at the rated 2133 MT/s.
The onboard register re-drives clock, command and control lines, reducing electrical load on the CPU memory controller and allowing larger total memory populations than unbuffered DIMMs.
At 30 mm tall, 133 mm long and 3 mm thick, the 288-pin RDIMM fits the standard DDR4 slot profile used in the validated Supermicro X10 boards listed.
More in Model-Specific Memory Upgrades
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?