Schneider Electric XAPG29202 22 mm pushbutton enclosure 2.03 in high gray die-cast zinc

Pushbutton enclosure for 22 mm controls

This Schneider Electric enclosure houses two 22 mm pushbuttons in a single column. The die-cast zinc body is finished in gray and carries a NEMA 13 and 4 rating for industrial environments. It suits control panels that need a compact, weather-resistant station for start/stop or emergency functions.

Sealed construction manages heat and debris

The metal housing dissipates heat from installed contact blocks without forced airflow, keeping operation silent. A 3/4 in conduit entry routes wiring cleanly while maintaining the enclosure seal. The NEMA rating confirms protection against dust, water spray and oil, so internal components stay cool and dry in normal use.

Fits panels with 2.03 in height allowance

Overall dimensions are 2.03 in high, 3.15 in wide and 5.12 in deep, leaving 1.93 in depth for contact blocks behind the face. The single 3/4 in conduit hole simplifies cable entry. Builders needing more than two operators or a different hole pattern will require a larger enclosure.