Schneider Electric XVC6B3 tower light 60 mm 24 V 0.08 A red orange green
60 mm LED tower light shows red, orange and green steady signals at 24 V AC/DC with 0.08 A draw
- Steady LED signals for clear status indication
- Three colours — red, orange, green — in one 60 mm tower
- 24 V AC/DC supply draws only 0.08 A
- NEMA 3R rated for indoor and outdoor use
- 100 000 hour LED life reduces maintenance
60 mm Tower Light for 24 V Systems
The Schneider Electric XVC6B3 is a 60 mm diameter tower light designed for 24 V AC/DC industrial circuits. It provides steady red, orange and green LED indication in a single stack. The unit draws 0.08 A at 1.8 W and suits panels or machines where clear visual status is required.
ABS and PBT housing with polycarbonate lens
The light mounts on a base and reaches an overall height of 508 5/16 mm. Its housing uses ABS and PBT while the cylindrical lens is polycarbonate. A 2 ft cord exits the base for wiring. NEMA 3R rating protects against falling dirt, rain and sleet in outdoor or wash-down areas.
Steady LED output rated for 100 000 hours
The LEDs operate continuously without flash or strobe modes. Operating temperature spans 14 to 122 degrees F. No audible sounder is included, so the device only signals visually. RoHS compliance and UL listing confirm regulatory acceptance for North American installations.
How it compares
Measured against everything we stock in Face Masks, Respirators & PPE, at today’s prices. Recalculated every night.
- Price $191.99
- Pricier than about 90% of the 5,612 comparable items (median $24.99).
Specifications
| Product | |
|---|---|
| Brand name | Schneider Electric |
| Model name | XVC6B3 |
Questions about this item
What does the 24 V AC/DC rating mean for wiring this tower light?
The unit runs on 24 V AC or DC at 0.08 A and 1.8 W, so the supply and cable must deliver that voltage and current continuously.
How much clearance does the 508 mm height and 60 mm diameter need for mounting?
Allow at least 508 mm vertical space and a 60 mm hole or bracket opening; the ABS/PBT base mounts on a flat surface with the supplied 2 ft cord exiting the bottom.
Which wires do I connect for the red, orange and green steady LEDs?
The 2 ft cord contains colour-coded leads — connect each lead to its corresponding 24 V circuit and common return; the light modes are steady only, so no flash controller is required.
More in Face Masks, Respirators & PPE
Similar items
Occunomix
Occunomix SP-CVL-BYM coverall black yellow M personal protective equipment
- HAWA
$189.99
0.00231839BTC
In stock
