Seagate Exos X18 ST18000NM005J 18TB 7200 RPM 256MB Cache SAS 12Gb/s 3.5" internal hard drive
- 18 TB
- SAS 12Gb/s
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
An 18 TB enterprise hard drive with 7200 RPM, 256 MB cache and SATA 6.0 Gb/s interface
Model SATA 6.0Gb/s
The Seagate Exos X18 ST18000NM001J is a 3.5-inch internal hard drive built for enterprise storage arrays. It delivers 18 TB of capacity on a SATA 6.0 Gb/s interface, spins at 7 200 RPM and provides a 256 MB cache to sustain heavy sequential workloads in cloud and scale-out data centres.
This drive targets operators who need maximum terabytes per rack and a 2.5 M-hour MTBF rating for continuous operation. It is less appropriate for buyers who need the low latency of solid-state media or a smaller form factor for desktop enclosures.
The single specification that determines fit is the 18 TB capacity combined with the SATA 6.0 Gb/s interface; if the storage pool requires that density on a standard SATA backplane this model matches the requirement, otherwise a different capacity or interface must be chosen.
Measured against everything we stock in 3.5-Inch Internal Desktop HDDs, at today’s prices. Recalculated every night.
New to this? Paying with USDT: TRC-20 or ERC-20 — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | Seagate |
| Product line | Exos X18 |
| Model name | ST18000NM001J |
| Total capacity | 18 TB |
| Recommended use | For Enterprise Storage |
| Performance | |
| Rotational speed | 7,200 RPM |
| Mean latency | 4.16 ms |
| Storage | |
| Flash memory type | Hard Drive |
| Cache memory | 256 MB |
| Ports & slots | |
| Interface type | SATA 6.0Gb/s |
| Size & build | |
| Form factor | 3.5 in (8.89 cm) |
| Max height | 26.1 mm |
| Maximum width | 101.85 mm |
| Maximum length | 147 mm |
| Shipping weight | 0.91 kg |
| Package size | 178 × 152 × 51 mm |
Other versions of this model
Yes, the drive uses a SATA 6.0Gb/s interface and a standard 3.5-inch form factor, so your system must provide a compatible SATA data port, a SATA power connector, and a 3.5-inch mounting bay.
It will operate on the same SATA 6.0Gb/s bus as older 3.5-inch drives, but the 18TB capacity and 7200 RPM speed may change rebuild times and power draw compared with smaller, slower units.
Check the drive’s reported rotational speed in your BIOS, UEFI, or a SMART monitoring tool; it should show 7200 RPM and a SATA 6.0Gb/s link rate.
More in 3.5-Inch Internal Desktop HDDs
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?