Seagate IronWolf Pro 12TB 7200 RPM 256MB CMR SATA 6.0Gb/s 3.5" ST12000NE0008
- 12 TB
- SATA 6.0Gb/s
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
14 TB NAS drive with 7200 RPM, 256 MB cache and AgileArray for RAID optimisation
Capacity 14TB
The Seagate IronWolf Pro ST14000NE0008 is a 14 TB hard drive built for 24×7 operation in network-attached storage. It uses conventional magnetic recording and a 7200 RPM spindle to deliver consistent throughput for RAID arrays. The SATA 6.0 Gb/s interface fits standard drive bays in home or small-business NAS units.
Desktop-class drives lack rotational vibration sensors and time-limited error recovery, so they degrade in multi-bay chassis. This model adds AgileArray dual-plane balancing and a 300 TB per year workload rating to handle heavier write cycles. The jump is worth it when your array sees constant streaming, backup or virtualization traffic that would exceed consumer drive limits.
Mount the drive in any 3.5 inch bay using four screws, connect the SATA data and power cables, and the NAS firmware will detect it. Common issues include forgetting to enable TLER in the RAID controller or skipping the IronWolf Health Management setup, which provides prevention and recovery alerts. The 26.11 mm height fits all standard server trays.
Measured against everything we stock in 3.5-Inch Internal Desktop HDDs, at today’s prices. Recalculated every night.
New to this? Paying with USDT: TRC-20 or ERC-20 — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | Seagate |
| Product line | IronWolf Pro |
| Model name | ST14000NE0008 |
| Total capacity | 14 TB |
| Recommended use | Enterprise NAS Hard Drives |
| Performance | |
| Rotational speed | 7,200 RPM |
| Mean latency | 4.16 ms |
| Storage | |
| Cache memory | 256 MB |
| Ports & slots | |
| Interface type | SATA 6.0Gb/s |
| Size & build | |
| Form factor | 3.5 in (8.89 cm) |
| Max height | 26.11 mm |
| Maximum width | 101.85 mm |
| Maximum length | 146.99 mm |
| Shipping weight | 0.69 kg |
| Package size | 169 × 136 × 34 mm |
Other versions of this model
The drive measures 146.99mm long, 101.85mm wide and 26.11mm high, matching the standard 3.5-inch sled used in most multi-bay NAS enclosures.
No jumpers are required; connect the SATA data and power cables, then ensure the NAS or controller is set to AHCI mode so the 7200 RPM drive negotiates the full 6.0Gb/s link speed.
Schedule a short SMART self-test weekly and an extended test monthly; IronWolf Health Management will also flag pre-fail attributes before the 2.5M-hour MTBF threshold is approached.
More in 3.5-Inch Internal Desktop HDDs
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?