Seagate ST18000NT001 IronWolf Pro 18TB 7200 RPM 256MB SATA 6.0Gb/s 3.5" internal hard drive
- 18 TB
- SATA 6.0Gb/s
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
20 TB 3.5" SATA drive at 7200 RPM with 256 MB cache, built for 24/7 multi-bay NAS workloads
The Seagate IronWolf Pro ST20000NT001 is a 20 TB hard drive built for 24/7 operation in multi-bay NAS enclosures. It uses CMR recording technology and a 7200 RPM spindle speed to sustain heavy workloads. The SATA 6.0 Gb/s interface connects directly to standard NAS controllers. It targets commercial and enterprise environments that require continuous data availability.
AgileArray firmware applies dual-plane balancing and time-limited error recovery to maintain RAID stability across multiple drive bays. The 256 MB cache absorbs burst write traffic during peak multi-user access. The drive is rated for always-on duty cycles in enterprise NAS deployments. Mechanical dimensions are 26.11 mm height, 101.85 mm width and 146.99 mm length.
IronWolf Health Management software monitors drive health parameters and provides proactive alerts plus recovery recommendations. The package includes three years of Rescue Data Recovery Services to offset costs if physical damage or corruption occurs. Retail or OEM packaging may vary depending on supply. No additional cables or mounting hardware are bundled.
Measured against everything we stock in 3.5-Inch Internal Desktop HDDs, at today’s prices. Recalculated every night.
New to this? Paying with USDT: TRC-20 or ERC-20 — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | Seagate |
| Product line | IronWolf Pro |
| Model name | ST20000NT001 |
| Part number | ST20000NT001 |
| Total capacity | 20 TB |
| Recommended use | Enterprise NAS Hard Drives |
| Performance | |
| Rotational speed | 7,200 RPM |
| Storage | |
| Recording method | CMR |
| Cache memory | 256 MB |
| Ports & slots | |
| Interface type | SATA 6.0Gb/s |
| Size & build | |
| Form factor | 3.5 in (8.89 cm) |
| Max height | 26.11 mm |
| Maximum width | 101.85 mm |
| Maximum length | 146.99 mm |
| Shipping weight | 0.91 kg |
| Package size | 196 × 152 × 51 mm |
Other versions of this model
Mount the 3.5" drive using the 101.85 mm width and 146.99 mm length screw points, connect the SATA 6.0Gb/s data and power cables, then enable the AgileArray dual-plane balancing and time-limited error recovery (TLER) in the NAS RAID controller so the drive handles multi-bay vibration correctly.
The drive includes three years of Rescue Data Recovery Services for accidental corruption or physical damage; after that period you must arrange your own recovery plan, and the IronWolf Health Management system will continue to provide proactive alerts so you can replace the unit before a predicted failure.
The 26.11 mm height restricts airflow in dense chassis, so thermal throttling can engage before the 7200 RPM platters or 256 MB cache saturate, especially when all bays run 24/7 at the full 20 TB capacity.
More in 3.5-Inch Internal Desktop HDDs
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?