Seagate IronWolf Pro 22TB 3.5in SATA 7200 RPM 512MB ST22000NT001 internal hard drive
- 22 TB
- SATA 6.0Gb/s
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
24 TB CMR drive built for 24/7 NAS RAID workloads with 550 TB/year rating and 512 MB cache
This 24 TB hard drive uses conventional magnetic recording and a 7200 RPM spindle to serve multi-bay NAS enclosures. A 512 MB cache and AgileArray firmware with dual-plane balancing and TLER keep RAID arrays responsive. The SATA 6.0 Gb/s interface fits standard 3.5 inch drive bays in commercial and enterprise storage servers.
Rated for 550 TB per year, the drive is built for continuous operation rather than burst transfers. Rotational vibration sensors and time-limited error recovery maintain consistent throughput across all bays during heavy multi-user loads. The 2.5 million hour MTBF figure reflects design targets for always-on environments.
Verify that your NAS chassis has enough 3.5 inch bays and that the RAID controller or HBA supports SATA 6.0 Gb/s links. Confirm the system can supply adequate cooling for a 26.11 mm high drive running at 7200 RPM. Ensure your backup strategy accounts for the 24 TB capacity before deploying in a production array.
Measured against everything we stock in 3.5-Inch Internal Desktop HDDs, at today’s prices. Recalculated every night.
New to this? Paying with USDT: TRC-20 or ERC-20 — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | Seagate |
| Product line | IronWolf Pro |
| Model name | ST24000NT002 |
| Part number | ST24000NT002 |
| Total capacity | 24 TB |
| Recommended use | Enterprise NAS Hard Drives |
| Performance | |
| Rotational speed | 7,200 RPM |
| Storage | |
| Recording method | CMR |
| Cache memory | 512 MB |
| Ports & slots | |
| Interface type | SATA 6.0Gb/s |
| Size & build | |
| Form factor | 3.5 in (8.89 cm) |
| Max height | 26.11 mm |
| Maximum width | 101.85 mm |
| Maximum length | 146.99 mm |
| Shipping weight | 0.69 kg |
| Package size | 147 × 102 × 26 mm |
Other versions of this model
The 7200 RPM CMR design is built for continuous 24x7 use with a 550 TB per year workload rating and 2.5 million hours MTBF, while AgileArray dual-plane balancing and RV sensors limit vibration and heat in multi-bay NAS.
It needs a standard 3.5 inch drive bay with a SATA 6.0 Gb/s data port and a SATA power connector; the drive measures 146.99 mm long, 101.85 mm wide and 26.11 mm high.
Yes, AgileArray includes time-limited error recovery and rotational vibration sensors tuned for multi-bay RAID, so the drive responds correctly to legacy controllers expecting enterprise-class behaviour.
More in 3.5-Inch Internal Desktop HDDs
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?