Seagate BarraCuda ST8000DM004 8TB 5400 RPM 256MB SATA 3.5" internal hard drive
- 8 TB
- SATA 6.0Gb/s
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
6 TB 3.5" SATA internal hard drive spinning at 7 200 rpm with 256 MB cache, built for multi-bay NAS using AgileArray balancing and RAID optimisation
The Seagate IronWolf Pro ST6000NE0023 is a 6 TB 3.5" internal hard drive built for multi-bay NAS enclosures. It spins at 7200 RPM with a 256 MB cache and uses Conventional Magnetic Recording for consistent write performance. The SATA 6.0 Gb/s interface fits standard drive bays and hot-swap trays in home or small-business servers. It is designed for always-on workloads in RAID arrays.
AgileArray firmware adds dual-plane balancing and RAID optimisation to reduce vibration in crowded chassis. Advanced power management lowers heat and acoustic output during idle periods. The bare drive measures 26.11 mm high, 101.85 mm wide and 146.99 mm long, weighing approximately 1.55 lb. Hot-plug support allows drive replacement without shutting down the NAS.
Confirm your NAS has a free 3.5" SATA bay and that the controller supports the desired RAID level for a 6 TB volume. Check that the power supply can deliver adequate current for an additional 7200 RPM spindle. Buyers needing hardware encryption or a five-year data-recovery service should look at other IronWolf Pro SKUs. Ensure your backup strategy covers the full capacity before deploying.
Measured against everything we stock in 3.5-Inch Internal Desktop HDDs, at today’s prices. Recalculated every night.
New to this? Paying with USDT: TRC-20 or ERC-20 — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | Seagate |
| Product line | IronWolf Pro |
| Model name | ST6000NE0023 |
| Total capacity | 6 TB |
| Recommended use | Enterprise NAS Hard Drives |
| Performance | |
| Rotational speed | 7,200 RPM |
| Mean latency | 4.16 ms |
| Storage | |
| Flash memory type | Hard Drive |
| Cache memory | 256 MB |
| Ports & slots | |
| Interface type | SATA 6.0Gb/s |
| Size & build | |
| Form factor | 3.5 in (8.89 cm) |
| Max height | 26.11 mm |
| Maximum width | 101.85 mm |
| Maximum length | 146.99 mm |
| Shipping weight | 0.71 kg |
| Package size | 163 × 133 × 33 mm |
The SATA 6.0Gb/s interface caps the maximum theoretical transfer rate at 6.0Gb/s; real-world sequential speeds are limited by the 7200 RPM mechanical design and 256MB cache.
The drive measures 146.99mm long, 101.85mm wide and 26.11mm high, matching standard 3.5" drive bays with a 1.55 lb weight.
Mount the 3.5" drive in a bay, connect the SATA data and power cables, then enable hot-plug in the BIOS or RAID controller so the drive is recognised on insertion.
More in 3.5-Inch Internal Desktop HDDs
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?