We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Seagate

Seagate XP800LE10005 Nytro 5550M 800GB enterprise SSD

SKU CH-AR8E-TKTA2 MPN XP800LE10005

Enterprise 2.5" 7mm NVMe SSD delivering 6000 MB/s reads and 1900 MB/s writes with 4300 TBW endurance

  • Total capacity800 GB
  • Sequential read speedUp to 6,000 MB/s
  • Sequential write speedUp to 1,900 MB/s
  • Interface typePCI-Express 4.0 x4
  • Form factor2.5 in 7 mm
  • Intended useConsumer
  • Up to 6000 MB/s sequential read for fast data access
  • Up to 1,000,000 IOPS random read for high transaction workloads
  • 4300 TBW endurance for long write life
  • 5 million hour MTBF for enterprise reliability
  • PCIe 4.0 x4 NVMe interface for modern server platforms

800GB PCIe 4.0 NVMe Enterprise Drive

The Seagate Nytro 5550M XP800LE10005 is an 800GB enterprise solid-state drive built for PCIe 4.0 x4 slots. It uses 3D eTLC NAND and the NVMe protocol to deliver sustained sequential reads up to 6000 MBps and writes up to 1900 MBps. Random read performance reaches 1,000,000 IOPS with 140,000 IOPS for random writes. The drive is rated for 4300TB written and a 2,500,000-hour MTBF.

Suited for high-throughput server workloads

This drive fits servers and storage arrays that need consistent low-latency NVMe performance over a PCIe 4.0 interface. The 2.5-inch 7mm form factor suits standard hot-swap bays. It is not for buyers who require hardware-based encryption on the drive itself. Systems limited to PCIe 3.0 or without NVMe support cannot use this drive at its rated speed.

PCIe 4.0 x4 NVMe interface decides compatibility

The single specification that determines fit is the PCIe 4.0 x4 NVMe connection. Your backplane or motherboard must provide this exact electrical and protocol link. If the slot is PCIe 3.0 only, or uses a different protocol, the drive will not operate as specified.

How it compares

Measured against everything we stock in Server & Data Center SSDs, at today’s prices. Recalculated every night.

Price $249.99
Cheaper than about 89% of the 1,039 comparable items (median $992.99).
Total capacity 800 GB
Lower than about 80% of the 522 comparable items (median 3.2 TB).
Sequential read speed Up to 6,000 MB/s
Typical for this category: the median of 311 items is 6,500 MB/s.
Price per TB $312.49 per TB
Cheaper than about 78% of the 522 comparable items (median $595.64 per TB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameSeagate
Product lineNytro 5550M
Model nameXP800LE10005
Total capacity800 GB
Intended useConsumer
Performance
Sequential read speedUp to 6,000 MB/s
Sequential write speedUp to 1,900 MB/s
Random read (4K)Up to 1,000,000 IOPS
Random write (4K)Up to 140,000 IOPS
Read latency90µs
Write latency12µs
Storage
NAND flash type3D eTLC
Write endurance4300 TB
Connectivity
Connection protocolNVMe
Ports & slots
Interface typePCI-Express 4.0 x4
Power
Idle power draw12.5 W
Active power draw5 W
Size & build
Form factor2.5 in 7 mm
Overall height7.1 mm
Overall width70.1 mm
Product depth100.4 mm
Product weight105g
Shipping weight0.45 kg
Package size25 × 25 × 25 mm
Environment & compliance
Operating temperature range0 °C to 70 °C
Storage temperature range-40 °C to 85 °C
More details
Mean time between failures2,500,000 h

Questions about this item

How can I confirm the Nytro 5550M is delivering its rated 6,000 MB/s sequential read speed after installation?

Run a sustained 128 KB sequential read test at queue depth 64; the drive should report up to 6,000 MB/s and 90 µs average read latency.

What ships with the XP800LE10005 and what must I source separately?

The bare 2.5" 7 mm drive ships alone; you must supply a U.2 or PCIe 4.0 x4 carrier, 12 V power, and any mounting hardware.

Which capacity in the Nytro 5550M line matches a 3 DWPD workload with 4,300 TB total endurance?

The 800 GB model provides exactly 4,300 TB written and 3 drive writes per day over five years.

More in Server & Data Center SSDs

Similar items