Sharp XG-C330 Projector Lamp 275W 2000 Hrs
A complete 275 W lamp module rated for 2,000 hours, supplied with housing for direct installation in Sharp projectors
- Power rating275 W
- Lamp lifespan2,000 Hrs.
- Product typeProjector Lamp
- Ready to install with pre-assembled bulb and housing
- Consistent brightness from 275W Ushio metal halide lamp
- Up to 2000 hours of projection before replacement
- Built to ISO 9001 quality standards for reliable performance
- Direct OEM replacement matching Sharp ANC430LP specifications
Ready-to-install replacement lamp
The Sharp XG-C330 module arrives as a complete housing with a 275 W Ushio metal-halide bulb already fitted, so it drops straight into compatible Sharp projectors without extra assembly. It is aimed at owners who need a direct swap for the original ANC430LP unit and want the projector back in service quickly. Buyers looking for a bare bulb without housing or a different wattage will not find that here.
Rated output and service life
The lamp draws 275 W and is rated for 2 000 hours of typical operation, giving a clear expectation for replacement planning. Manufacturing follows ISO 9001 checks covering beam performance, ignition voltage, connections and run-time to keep output stable during normal use.
Consistent output over the full cycle
Quality testing verifies that ignition, voltage and beam characteristics remain within spec from first start to the end of the rated 2 000-hour span, so brightness does not fade prematurely during extended sessions. Each unit is inspected against the same standard before it ships.
How it compares
Measured against everything we stock in Replacement Projector Bulbs, at today’s prices. Recalculated every night.
- Price $164.99
- Pricier than about 85% of the 9,513 comparable items (median $99.99).
- Power rating 275 W
- Higher than about 80% of the 8,831 comparable items (median 215 W).
Specifications
| Product | |
|---|---|
| Brand name | Sharp |
| Product type | Projector Lamp |
| Display | |
| Lamp lifespan | 2,000 Hrs. |
| Power | |
| Power rating | 275 W |
Questions about this item
How do I install the pre-assembled Sharp XG-C330 lamp module without damaging the 275W Ushio bulb?
Power down and unplug the projector, let it cool completely, open the lamp door, remove the old module by its handle, insert the new housing until it clicks, then close the door before powering on.
Which component will require replacement after roughly 2,000 hours of operation?
The 275W Ushio metal halide bulb inside the housing reaches its rated 2,000-hour lifespan, so the entire lamp module must be swapped at that point.
What thermal limit triggers automatic shutdown during extended sessions?
The projector’s internal temperature sensor will cut power if the 275W lamp exceeds safe operating heat, protecting both the Ushio bulb and the optical engine.
More in Replacement Projector Bulbs
Similar items
3D PERCEPTION Christie 38-VIV201-01P OEM Replacement Projector Lamp 250W UHP
- 250 W
- 1,500 Hrs.
PROJECTIONDESIGN Action M25 projector lamp 220W 2000 Hrs
- 220 W
- 2,000 Hrs.





