Sharp XG-C435X Projector Lamp 275W 2000 Hrs
Replacement lamp module with 275 W metal-halide bulb rated for 2,000 hours
- Power rating275 W
- Lamp lifespan2,000 Hrs.
- Product typeProjector Lamp
- Ready to install with pre-assembled bulb and housing
- Bright 275W metal halide output for clear projection
- Rated 2000 hours lamp life for extended use
- Genuine OEM Ushio bulb ensures reliable performance
- Manufactured to ISO 9001 quality standards
Replacement lamp for Sharp projectors
The Sharp XG-C435X module delivers a new 275 W Ushio metal-halide bulb inside a pre-assembled housing that matches the original ANC430LP specification. It is intended for owners of compatible Sharp projectors who need a direct, tool-free swap when the existing lamp reaches end of life.
Restores original brightness after 2 000 hours
The lamp is rated for 2 000 hours of operation, matching the factory specification for the ANC430LP unit. The jump is worth it when the projected image has dimmed noticeably or the projector signals a lamp replacement warning, because the new module returns light output to its original level without recalibration.
Consistent output under continuous use
Built to ISO 9001 quality checks for ignition, voltage stability, beam performance and run-time, the bulb maintains steady colour and brightness during extended presentations or classroom sessions. It is not suited for installations that demand a longer service interval or a lower power draw than 275 W.
How it compares
Measured against everything we stock in Replacement Projector Bulbs, at today’s prices. Recalculated every night.
- Price $175.99
- Pricier than about 88% of the 9,513 comparable items (median $99.99).
- Power rating 275 W
- Higher than about 80% of the 8,831 comparable items (median 215 W).
Specifications
| Product | |
|---|---|
| Brand name | Sharp |
| Product type | Projector Lamp |
| Display | |
| Lamp lifespan | 2,000 Hrs. |
| Power | |
| Power rating | 275 W |
Questions about this item
Will the ANC430LP module fit my Sharp XG-C435X projector without extra brackets?
The ANC430LP module is a fully assembled bulb and housing designed to slot directly into the Sharp XG-C435X projector with no additional brackets required.
What is the common mistake when installing the 275W Ushio metal halide lamp?
Touching the bare quartz envelope of the 275W Ushio metal halide bulb leaves oils that cause hot spots and early failure; handle only the plastic housing during installation.
When should I replace the lamp after roughly 2000 hours of use?
Replace the lamp when brightness drops noticeably or the projector’s lamp-hour counter approaches 2000 hours, whichever occurs first.
More in Replacement Projector Bulbs
Similar items
Toshiba TLP-B2 Ultra U projector lamp 120W 2000 Hrs
- 120 W
- 2,000 Hrs.
EIKI LC-WXL200A projector lamp POA-LMP136 330W
- 330 W
- 3,000 (Economy) Hrs.
3D PERCEPTION Compact SX+26 Projector Lamp 220W
- 220 W
- 2,000 Hrs.





