Shennanshun Technology Ltd
Shennanshun Technology Ltd Pro Sound 2-Channel Class D Amplifier TPA3116 50W x 2 V10B Black
A compact Class D stereo amplifier delivering 50W per channel into 4 ohms with 0.04% THD, driven by a TI TPA3116D2 chip and supplied with a 19V power supply
- Clear sound with 0.04% THD from TI TPA3116D2 chip
- Drives 2–8 ohm speakers at 50W × 2 into 4 ohms
- Solid aluminium chassis with built-in speaker protection
- Includes 19V power supply and AC cord
- 18-month warranty covers the amplifier
Compact 50 W stereo amplifier
The Shennanshun Pro Sound unit uses a TI TPA3116D2 Class D chip to deliver 50 W per channel into 4 ohms across 20 Hz to 20 kHz with 0.04 % THD. A solid aluminium chassis houses the integrated amp and a built‑in speaker protection circuit. The package includes the V1.0 amplifier, a 19 V power supply, AC cord and manual.
Suits desktop and bookshelf setups
Buyers wanting a small integrated amp for near‑field listening with passive speakers rated 2 to 8 ohms will find the power rating and low noise floor appropriate. Installers needing multi‑zone distribution, phono pre‑amplification or wireless streaming should consider other categories.
50 W per channel into 4 ohms
This single output figure determines whether the amplifier can drive your chosen speakers to the desired volume without distortion. Match the rating to your speaker sensitivity and room size before purchasing.
How it compares
Measured against everything we stock in Pro Audio Equipment, at today’s prices. Recalculated every night.
- Price $68.99
- Pricier than about 55% of the 613 comparable items (median $56.99).
Specifications
No published specifications for this item yet.
Questions about this item
Which audio sources can I connect to the TPA3116D2 amplifier's input?
You can connect an MP3 player, phone, PC or Echo Dot to the stereo line-level input.
Will the 50 W × 2 amplifier drive my existing 6 Ω bookshelf speakers?
Yes — the amp is rated for 2 Ω to 8 Ω loads, so 6 Ω speakers are well within range.
How can I verify the amplifier is performing to its 0.04 % THD spec after setup?
Play a 1 kHz test tone at moderate level and measure distortion with an audio analyser; it should read ≤ 0.04 % across 20 Hz – 20 kHz.
More in Pro Audio Equipment
Similar items
Kent Safety Life Vest Black XS/SM USCG 70 18in 16in 15 1/2lb
- Black
- Personal Protective…
Monoprice Inc. 115428 Pro Sound HDMI Cable 18Gbps 28AWG 60Hz 6ft
- Consumer Electronics





