We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 30 cm cable with one 9-pin male header splitting to four 9-pin female headers

Shuole

Shuole USB 2.0 Header Splitter 1 to 4 Ports 30cm

SKU CH-GE67-RD5ZS

Adds four internal USB 2.0 headers from a single 9-pin motherboard connector using a 30 cm shielded cable with adhesive mounting

  • Connection typeUSB A to Micro USB & Mini USB
  • Key featuresMotherboard USB header splitter 1 to 4 ports Hub, wire belt
  • Expands one motherboard header into four USB 2.0 ports
  • 30 cm cable gives flexible placement inside the case
  • Double chipset design keeps all four connections stable
  • Self-adhesive backing secures the splitter to the chassis
  • Prevents short-circuit risk with protected 9-pin outlet design

Port Multiplier for Internal USB 2.0 Headers

This adapter converts a single 9-pin USB 2.0 motherboard header into four separate female ports. It provides the extra internal connections needed for front-panel USB ports, RGB controllers, fan hubs, Bluetooth modules or similar devices. The 30 cm cable length gives flexibility for routing inside the case. A double chipset design is used to maintain stable operation across the four ports.

Suits Builders with Limited Motherboard Headers

The splitter is intended for PC builders who have only one or two front-panel USB headers on their motherboard but need to connect several internal USB 2.0 devices at once. It is not suitable for users who require USB 3.0 or higher data rates, as the interface is limited to USB 2.0 signalling. Builders needing external ports or a different header pinout should look at other solutions.

Adhesive Mount and Plug-and-Play Setup

The bundle includes the splitter cable with self-adhesive tape on the hub for direct mounting on the motherboard tray or chassis. No drivers or additional software are required; installation is described as a simple plug-and-play process. The 12-inch cable and adhesive backing let you secure the hub in a convenient location before connecting up to four 9-pin devices.

How it compares

Measured against everything we stock in USB Cords & Extension Cables, at today’s prices. Recalculated every night.

Price $14.99
Typical for this category: the median of 15,227 items is $14.99.

Specifications

Ports & slots
Connection typeUSB A to Micro USB & Mini USB

Questions about this item

Does my motherboard need a spare 9-pin USB 2.0 header to use this splitter?

Yes, the male 9-pin connector plugs directly into a single front-panel USB 2.0 header on the motherboard.

Will my existing USB 2.0 front-panel ports and RGB hubs still work when connected through the four female headers?

Each of the four 9-pin female headers carries the same USB 2.0 signals, so legacy front-panel ports, RGB controllers, fan hubs or Bluetooth adapters function normally.

How can I verify the splitter is operating correctly after installation?

Connect up to four devices such as a DIY light bar, cooling fan and Bluetooth dongle; if each device powers on and is recognised by the system the splitter is working.

More in USB Cords & Extension Cables

Similar items