Klein Tools 85191 Conduit Reaming Screwdriver 5/16 tip 13 19 25 mm
- Card
- * Hooded-blade desi…
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
M12 cylindrical inductive sensor with 4 mm range, IP67 enclosure and 10–30 V DC supply
The SICK IM12-04NDO-ZC1 is a cylindrical inductive sensor with M12 x 1 thread for industrial position detection. It offers a 4 mm sensing range and a safe sensing range of 3.24 mm. The non-flush mounting style suits metal detection tasks in automation and machine building. A 4-pin M12 male connector provides standard electrical wiring.
The nickel-plated brass housing meets IP67 rating for dust and water resistance. Supply voltage spans 10 V DC to 30 V DC with 10 % ripple tolerance. Voltage drop is 2.8 V at 100 mA continuous current. Off-state current stays at 0.8 mA with a 3 mA minimum load. Short-circuit and reverse polarity protection are integrated.
Switching frequency reaches 1 500 Hz for high-speed counting applications. Hysteresis ranges from 2 % to 10 % with reproducibility of 5 %. Temperature drift of the sensing range is limited to ±10 % across –25 °C to +70 °C. Shock resistance is rated at 30 g for 11 ms and vibration resistance at 10–55 Hz with 1 mm amplitude.
Measured against everything we stock in Electrical Trade Tools & Kits, at today’s prices. Recalculated every night.
| Product | |
|---|---|
| Brand name | SICK |
| Model name | SICK IM12-04NDO-ZC1 |
Mount the sensor using its M12 x 1 thread with a 48 mm thread length; do not exceed the 10 Nm maximum tightening torque to prevent housing damage.
The sensor is a sealed IP67 unit with nickel-plated brass housing and plastic sensing face; no user-serviceable parts are defined, so the entire device is replaced if output drifts beyond the ±10 % temperature specification.
The 2.8 V voltage drop across the DC 2-wire output and the 100 mA continuous current rating constrain the load before the 50 ms start-up delay or thermal limits become factors.
More in Electrical Trade Tools & Kits
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?