Klein Tools 85191 Conduit Reaming Screwdriver 5/16 tip 13 19 25 mm
- Card
- * Hooded-blade desi…
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
M8 inductive proximity sensor detects metal at 4 mm with NPN output, 4,000 Hz switching and IP67 rating
The Sick IME08-04NNSZTOS is an inductive proximity sensor with a 4 mm sensing range and a safe sensing range of 3.24 mm. It features an M8 x 1 cylindrical thread design suitable for industrial automation tasks requiring non-flush mounting. The NPN normally open output operates on a 10 V DC to 30 V DC supply voltage.
A switching frequency of 4,000 Hz supports rapid detection cycles under continuous operation. Reproducibility is rated at 2 percent with a hysteresis band of 5 percent to 15 percent. Temperature drift of the sensing range stays within ±10 percent across the operating envelope. Short-circuit, reverse polarity and power-up pulse protection are integrated.
The housing uses nickel-plated brass with a PA 66 sensing face, rated IP67 for dust and water ingress protection. An M8 3-pin connector provides the electrical interface while the metal thread allows secure mounting with a maximum tightening torque of 5 Nm. The unit withstands 30 g shock and vibration from 10 Hz to 55 Hz at 1 mm amplitude. Operating temperature spans –25 °C to +75 °C.
Measured against everything we stock in Electrical Trade Tools & Kits, at today’s prices. Recalculated every night.
| Product | |
|---|---|
| Brand name | Sick |
| Model name | SICK IME08-04NNSZTOS |
Current consumption is 10 mA at 10–30 V DC, with a maximum continuous output current of 200 mA.
An M8 3-pin connector and a 10–30 V DC supply with ≤10 % ripple are needed.
This non-flush M8×1 sensor needs a 4 mm clear zone; its 5 %–15 % hysteresis and ±10 % temperature drift differ from flush types.
More in Electrical Trade Tools & Kits
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?