Klein Tools 85191 Conduit Reaming Screwdriver 5/16 tip 13 19 25 mm
- Card
- * Hooded-blade desi…
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Photoelectric proximity sensor detects objects from 10 mm to 700 mm using infrared light, with NPN output, M12 connector and IP67 rating
The Sick VTE18-4N8740 is a new cylindrical photoelectric proximity sensor that uses an energetic detection principle. Its M18 × 1 thread and 78 mm housing length suit standard mounting points in industrial equipment. An axial infrared LED emits a 2.8° beam that produces a 40 mm spot at 800 mm. The NPN output supports selectable light or dark switching via the L/D control cable.
A 10–30 V DC supply with ripple below 10 % powers the unit, drawing 30 mA. The 4-pin M12 male connector carries the NPN switching signal rated at 100 mA and 250 Hz. IP67 enclosure rating and a –25 °C to +70 °C operating range allow installation in wet or temperature-variable zones. Plastic PBT/PC housing and PMMA optics resist typical industrial contaminants.
The sensor upgrades mechanical limit switches or earlier photoelectric units that lack adjustable range or selectable switching mode. The 270° potentiometer lets you set the sensing window between 10 mm and 700 mm without changing hardware. The jump is worthwhile when an application needs non-contact detection, faster 2 ms response, or the durability of an IP67-rated plastic body.
Measured against everything we stock in Electrical Trade Tools & Kits, at today’s prices. Recalculated every night.
| Product | |
|---|---|
| Brand name | SICK |
| Model name | SICK VTE18-4N8740 |
The maximum sensing range is 800 mm, with an assured operating range of 10 mm to 700 mm using the potentiometer adjustment.
Power consumption is 30 mA with a supply voltage of 10 V DC to 30 V DC and ripple below 10 %.
You need a 4-pin M12 female connector cable to match the male connector on the sensor housing.
More in Electrical Trade Tools & Kits
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?